Download manual

/
keys in the
40
<Figure 6.8.2>
ҫ Note : Further detailed information is not mentioned in this manual since the
information depends on the Smart Card in use.
͉ Proceed with further instructions displayed on the screen to check more detailed information
depending on the Smart Card in use.
͈ You can access detailed information about the Smart Card using the
Main Menu to select ‘CA’ and pressing
. <Figure 6.8.2>
button to show the file list. Select the file you want to play back by using
button.
CH
,
<Figure 6.9.1>
41
<Figure 6.9.2>
͍ Press
button again to see a full screen. And then the following time-bar will appear.
<Figure 6.9.2>
͌ Press YELLOW button to delete the selected file.
͋ Press GREEN button to rename the filename of selected file.
͊ If you have partitioned hard drive, Press RED button to select another drive.
͉ Press
button. In the right side of screen, detailed information about the selected file will
be displayed. (Total file size / Total time / Elapsed Time and USB device information) <Figure
6.9.1>
CH
͈ Press
,
Ȟ File Playback
1) File List
CH
2) The Status of the Smart Card
CH
6.9 DVR
6.8 Conditional Access System