Download SLFLIB User Manual

CHAPTER 2
SLFLIB Directives
2.15 STAMP Directive
The STAMP directive forces a date and time stamp to be applied to all members in
the library file.
2.15.1 Syntax
STAMP [date [time]]
2.15.2 Rules
- Format of date is YYMMDD.
- Format of time is HHMMSS.
- When time or date and time is not specified, current date and/or time will
be used as default.
- The STAMP directive may be used (through batch mode operation) to reestablish stamp information on the library file. History information however is
lost since the same (latest) stamp will be applied to all members. TP8 mode
operation may be resumed when both PRIMARY and SECONDARY library files
have been properly stamped.
Note (LODLIB format only): The date and time stamp is critical for TP8 mode
operation. If library file(s) are updated through LODLIB, these stamps are lost and
synchronization becomes impossible. An error message is issued, when such
condition is detected in TP8 mode and the execution is aborted. Since stamps are
maintained both in a dummy member and in each member entry, the error message
includes information on the latest stamp applied to the library file.
SLFLIB User Manual
Copyright 1999, B & C Solution - Denmark
2-11