Download Untitled - IQmarket

IC 1
EIB Internet
Controller REG-K
4 Startup
USER MANUAL
Linked devices
10
Using IC 1 EIB, you can set up Internet access to up to 32 LAN devices with only one telephone
connection. The LAN network devices are linked, and need not be permanently connected to the
Internet. Web access is established via the Domoport Internet portal. If you are connected with an
IC 1 EIB Internet Controller REG-K via your Domoport user account, you can access all networked
devices via this device. Linked devices can be other IC 1 EIB Internet Controller REG-K, as well as
foreign devices with integrated web servers, such as webcams.
Links
By acting as a gateway, the IC 1 EIB enables you to externally
access up to 32 devices in the LAN via a single Internet connection. On Domoport, the web access for the IC 1 EIB is set
up. You use the gateway of this device that has an Internet connection to set up access to the downstream linked devices.
There are the following options for accessing downstream linked
devices:
Gateway access without local login: On the downstream
devices no user account configuration is required, since the
rights of the current user (administrator, user or viewer) are forwarded from device to device whenever access takes place.
Gateway access with local login: When accessing a linked
device, the user has to enter a user name and password on the
login page of the linked device.
Access to foreign devices in the LAN, for example webcams or
other controllers with their own web server, can be achieved via
the gateway function of the Internet controller.
To link an IC 1 EIB Internet Controller REG-K and
other LAN devices:
1. Click Configuration in the navigation bar and select
the menu item Linked devices. The IC 1 EIB opens the
Configure linked devices tab.
2.
3.
48
Under Web server with LAN access, in the Identifier box, enter
a name for the linked device.
Note: If you have linked devices, the IC 1 EIB adds the
Select device command to the navigation bar. The IC 1 EIB
shows the names of the linked devices as submenu to the
Select device menu. Click a submenu command to go to
the linked device.
Enter the local (internal) IP address of the linked device in
the Local IP address box. You can use the IP address to set
up reach-through access to additional devices in the LAN.
© 2005 Merten GmbH & Co. KG
Example linked devices