Download T-REX - Bremach
Transcript
If the maximum level is reached, proceed with draining the water through the drain tap. FILTER ELEMENT SUBSTITUTION A. B. C. D. Turn the engine off and empty the fi lter (see above) Undo the cover bolts (M5 hexagonal, SW 8), remove the cover. Remove the filter element housing and remove the filter element. Place the new filter element in its housing and position the housing into the filter unit. E. Verify that the cover has been placed correctly and that there are no damages to the cover gaskets. F. Tighten the cover bolts moving from one to bolt to its opposite. G. Breathe the fuel filter system. NOTE: If the „SEPAR“ filter gets clogged because of winter diesel with paraffin, the filtering element can be removed thus allowing the correct flow. WARNING: If the vehicle is used in cold countries we recommend the SEPAR filter with integrated heating. T-REX Pag. 96