Download Data Replication Manager HSG80 Version 8.7P Scripting User Manual

Extended Planned Site Failover with Full Failback Procedure
Example Display 1
BuildngATop> show remote_copy_sets full
Name
Uses
Used by
-----------------------------------------------------------------------RCS1
remote copy
D1
AS_D1
Reported LUN ID: 6000-1FE1-0000-4250-0009-9411-5654-003E
Switches:
OPERATION_MODE = SYNCHRONOUS
ERROR_MODE
= FAILSAFE
FAILOVER_MODE
= MANUAL
OUTSTANDING_IOS = 20
Initiator (BUILDNGA\D1) state:
INOPERATIVE
Unit failsafe locked
Target state:
BUILDNGB\D1
is COPYING
0% complete
a. If all remote copy sets are in failsafe error mode, and:
1) Every initiator state is failsafe locked, proceed to step 5.
2) Every initiator state is not failsafe locked, proceed to step 5.
3) Initiator states are a mixture of failsafe locked or not being in failsafe
locked, proceed to step 4.
b. If all remote copy sets are in normal mode, proceed to step 5.
c. If the remote copy sets are mixed between failsafe and normal error modes,
and:
1) Every remote copy set in failsafe error mode is failsafe locked, and every
remote copy set in normal error mode has no targets, proceed to step 5.
2) Every remote copy set in failsafe error mode is not in a failsafe locked
state, proceed to step 5.
3) Any remote copy sets in failsafe error mode are failsafe locked, and remote
copy sets in normal error mode have targets, proceed to step 4.
I
4. For remote copy sets in failsafe error mode with mixed initiator states, or a
mixture of error modes with failsafe error modes that are failsafe locked and
normal error mode with targets, change all the remote copy sets in failsafe mode
to normal mode. Use the CLI command:
SET RemoteCopySetName ERROR_MODE=NORMAL
Example: SET RCS1 ERROR_MODE=NORMAL
When the remote copy sets are in normal mode, proceed to the next step.
Data Replication Manager HSG80 ACS Version 8.7P Scripting User Guide
10–3