Download Robe MiniMe
Transcript
5. Gently tighten the stabilization screw until reaches the base of the fixture to prevent the MiniMe from wobbling. 6. After connecting power and DMX cables place the cable cover (9) and secure it with an 1/4-turn screw (10) 3.5 Installing the wide-angle lens module Disconnect from the mains before the wide-angle module installing If you need to install the optional wide-angle lens module, follow the steps: 1. Remove both top and button covers (1) from the fixture head. 2. Unscrew two screws (2) on the each side of the head. 3. Remove the standard lens module (3). 4. Place the wide-angle lens module (4). 5. Secure the wide-angle lens module on the fixture head by means of two screws (2) on each side of the head. 6. Place back both top and button covers (1) 11