Download Eppendorf Easypet® - Operating manual

Eppendorf Easypet® — Operating manual
5.3
Dispensing liquid
Flow-out
During flow-out, a valve is opened. In this mode,
liquid dispensing takes place without activating
the pump, only using atmospheric pressure.
Abb. 5:Dispense liquid
Easypet
1. Place the pipette against the wall of the
vessel.
2. Press the dispensing button down to 5 mm.
Vary the pressure in order to change the
dispensing speed.
Blow-out
During blow-out, liquid is dispensed with the aid
of the pump.
1. In this mode, the dispensing speed can be
continuously adjusted using the adjustment
dial.
2. Place the pipette against the wall of the
vessel.
3. Press in the dispensing button completely.
Fig. 5:
14
Dispense liquid