Download FIBARO DIMMER 2

30
GROUP 40 - Dimmer 2 operation - Alarms
40. Response to General Purpose Alarm
Available settings: 0 - No reaction
1 - Turn on the load
2 - Turn off the load
Default setting:
3 - Load blinking
3
Parameter size:
1 [byte]
41. Response to Water Flooding Alarm
Available settings: 0 - No reaction
1 - Turn on the load
2 - Turn off the load
Default setting:
3 - Load blinking
2
Parameter size:
1 [byte]
42. Response to Smoke, CO or CO2 Alarm
Available settings: 0 - No reaction
1 - Turn on the load
2 - Turn off the load
Default setting:
3 - Load blinking
3
Parameter size:
1 [byte]
43. Response to Temperature Alarm
Available settings: 0 - No reaction
1 - Turn on the load
2 - Turn off the load
Default setting:
i
NOTE
Alarm state may be
cancelled earlier, as
a result of pressing
the switch or sending
the Z-Wave command
frame.
3 - Load blinking
1
Parameter size:
1 [byte]
44. Time of alarm state
Available settings: 1-32767 (1-32767 seconds)
Default setting:
600 (600s)
Parameter size:
2 [bytes]
Alarm settings - reports
45. OVERLOAD alarm report (load power consumption too high)
Available settings: 0 - No reaction
Default setting:
Advanced parameters
1 - Send an alarm frame
1
Parameter size:
1 [byte]