Download User Manual - I.A.T.S.E Local 500

CHANGING DMX UNIVERSE
NUMBERS
It is also possible to change a fixture from one DMX universe to another. This can be done by
individual fixture, fixture range or by moving an entire universe.
To change the universe of an individual or range of fixtures
1 Highlight the universe cell of the fixtures(s) to be changed.
2 Using the keypad, enter the new universe number.
3 Press Enter.
To move an entire universe
1 Press the Move key.
2 Press the “Universe” softkey found in the lower right hand corner of the Patch screen.
3 Enter the original universe number using the key pad.
4 Press the “@” key.
5 Enter the destination universe.
6 Press Enter.
DELETING
A
FIXTURE FROM PATCH
A fixture that is deleted from the patch is completely removed from the patch as well as all
groups, presets and cues that it may have been recorded in. When this operation is completed,
the only way to restore that fixture to the show is to load a previously saved show from memory.
When deleting a fixture or fixtures, a pop-up window will appear:
• Pressing “Confirm” will execute the command and remove the fixture(s) from the patch.
• Pressing “Cancel” will stop the execution of the command and clear the command line.
• Pressing “Edit” will stop the execution of the command, but allows you to return to the command
line and make any desired changes.
To delete a fixture from the patch (and all associated groups, presets and cues):
1 Press the Delete key above the numeric keypad
2 Enter the fixture number(s) that you wish to be unpatched
3 Press Enter
4 Select Confirm, Cancel or Edit from the pop-up window.
44
Maxxyz