Download Installation Manual

3.Take out the plastic cap of the HID bulb. (Don’t touch the bulb to avoid burn.)
7.Connect the lamp wire with ballast wire.
4 . I n s t a l l t h e H I D l a m p i n t h e c a r. M a k e s u r e t h e p r e s s s p r i n g h a s b e e n
a s s e m b l e d p r o p e r l y.
5.Connect the wires.
6.Take the bulb wire. Fix the ballast with double faced adhesive tape firmly
to the ventilatory place, keep some distance with motor.
8.Test the lamps and make sure they can work properly.
Installation Notice
1.Recommend a professional technician to install the unit.
2.Make sure the engine and light are cool enough before installation to
prevent a burn.
3.Wear gloves in the operation to avoid the electric shock.
4.Don't stare at the xenon light directly to protect your eyes.
03
www.yitoa.com/hid
04
www.yitoa.com/hid