Download PSSnet SHL - Web- based Interface

Redundancy
Parameter
Oper PointToPoint
6.3 Rapid Spanning Tree
Meaning
If this port has a full-duplex link to
another RSTP device, the value for
Oper PointToPoint will become
„true“, else it will become „false“
(e. g., if a hub is connected). A
Point-to-point connection is a direct
connection between two RSTP devices. The direct, local communications between the two switches
results in a short reconfiguration
time.
Designated
Displays the bridge identification of
Root
the designated root Switch for this
port.
Designated
Display of the costs of the path from
Costs
this port to the root Switch.
Designated Port Display of the port identifier of the
port that creates the connection to
the root Switch for this port (on the
designated Switch).
Value range
true, false
Default setting
auto
(is calculated):
FDX = true
HDX = false
Bridge identification
(hexadecimal)
-
Costs
-
Port identification
(hexadecimal) and
port number
-
Table 42: Port-related RSTP settings and displays
Figure 38: RSTP Port dialog
114
PSSnet SHL - Web- based Interface
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern