Download PGRemote User`s Manual
Transcript
The Moving Pixel Company PGRemote User’s Manual – Doc. Rev. 1.34 -- 5/6/13 public public public public public public public public const const const const const const const const int int int int int int int int PIXEL_STREAM_RGB666 = 0x23; PIXEL_STREAM_RGB888 = 0x24; PIXEL_STREAM_RAW6 = 0x28; PIXEL_STREAM_RAW7 = 0x29; PIXEL_STREAM_RAW8 = 0x2A; PIXEL_STREAM_RAW10 = 0x2B; PIXEL_STREAM_RAW12 = 0x2C; PIXEL_STREAM_RAW14 = 0x2D; // option1: non-zero length payload array // option2: filename public const int USER_8BIT_TYPE1 = 0x30; public const int USER_8BIT_TYPE2 = 0x31; public const int USER_8BIT_TYPE3 = 0x32; public const int USER_8BIT_TYPE4 = 0x33; //////////////////////////////////////////////// // DCS_SHORT_WRITE cmd types //////////////////////////////////////////////// // 0 argument commands public const int ENTER_IDLE_MODE = 0x39; public const int ENTER_INVERT_MODE = 0x21; public const int ENTER_NORMAL_MODE = 0x13; public const int ENTER_PARTIAL_MODE = 0x12; public const int ENTER_SLEEP_MODE = 0x10; public const int EXIT_IDLE_MODE = 0x38; public const int EXIT_INVERT_MODE = 0x20; public const int EXIT_SLEEP_MODE = 0x11; public const int NOP = 0; public const int SET_DISPLAY_OFF = 0x28; public const int SET_DISPLAY_ON = 0x29; public const int SET_TEAR_OFF = 0x34; public const int SOFT_RESET = 0x01; // arg1 = Mode[7:0] public const int SET_ADDRESS_MODE = 0x36; // arg1 = GammaCurve[7:0] public const int SET_GAMMA_CURVE = 0x26; // arg1 = Format[7:0] public const int SET_PIXEL_FORMAT = 0x3a; // arg1 = M[0] public const int SET_TEAR_ON = 0x35; //////////////////////////////////////////////// // DCS_READ cmd types //////////////////////////////////////////////// public public public public public public const const const const const const int int int int int int GET_ADDRESS_MODE = 0x0b; GET_BLUE_CHANNEL = 0x08; GET_DIAGNOSTIC_RESULT = 0x0f; GET_DISPLAY_MODE = 0x0d; GET_GREEN_CHANNEL = 0x07; GET_PIXEL_FORMAT = 0x0c; - Page 97 -