1
Download ATX7006 User Manual
Transcript
5.2 Digital IO Pattern Generator and Data IO setup ..................................................................... 60 5.2.1 Setup the measurement timing with the Pattern Bit definition ........................................ 60 5.2.2 Setup static output lines (SDO) ....................................................................................... 70 5.3 Initialize and connect signal module channels ....................................................................... 71 5.3.1 Initialize and connect analog frontend of stimulus or capturing channels ...................... 71 5.3.2 Initialize and connect reference and power supply channels .......................................... 71 5.3.3 Start the measurement .................................................................................................... 73 6 5.4 Post measurement steps ........................................................................................................ 75 5.4.1 Set modules back in configuration mode ........................................................................ 75 5.4.2 Calculation-parameter and -options definition ................................................................. 75 5.4.3 Start calculation ............................................................................................................... 84 5.4.4 Read out measurement and calculation results .............................................................. 88 Command reference ..................................................................................................................................93 6.1 7 8 Overview ................................................................................................................................. 93 6.2 General Syntax ....................................................................................................................... 97 Command descriptions .............................................................................................................................98 Specifications ...........................................................................................................................................172 8.1 DIO module, inputs, outputs ................................................................................................. 172 8.2 Specifications AWG22 module ............................................................................................. 173 8.3 Specifications AWG20 module ............................................................................................. 174 8.4 Specifications AWG18 module ............................................................................................. 174 8.5 Specifications AWG16 module ............................................................................................. 174 8.6 Specifications WFD22 module ............................................................................................. 175 8.7 Specifications WFD20 module ............................................................................................. 175 8.8 Specifications WFD16 module ............................................................................................. 175 8.9 Specifications Dual reference source module ...................................................................... 176 8.10 Specifications Dual power Supply module ........................................................................... 176 Page 3 ATX7006 user manual rev.2.16
