Download TORC-SafeStop_E-stop..

SafeStop™ User Manual
Revision 1.2
7.1 POWER/SERIAL Connector Detail
The POWER/SERIAL connector is used to supply power to the ES-200R receiver
and for RS-232 communications.
Mating connector: Switchcraft EN3C7F
Item
1
2
3
4
5
6
7
Description
+12V (Red)
Power GND (Black)
Tx (DB9 Pin 2)
Rx (factory use only)
DTR (factory use only)
Signal GND (DB9 Pin 5)
RTS (factory use only)
7.2 STOP/PAUSE Connector Detail
The STOP/PAUSE connector is used for the contact connections of both the
Run/Pause, and Release/Stop contacts.
Mating connector: Switchcraft EN3C6F
Item
1
2
3
4
5
6
14
Description
Stop VIN (Yellow)
Stop OUT (Blue)
Stop GND (not cabled)
Pause VIN (White)
Pause OUT (Green)
Pause GND (not cabled)
14