Download User Manual - Comkit Online

SKOPE VF Series
Positioning the Cabinet
Power Cord The freezer has a flexible power cord fitted with a 3-pin plug, which exits
from the top rear of the cabinet. Pull the power cord around so that it’s not
trapped before you position the cabinet.
Freezer The location of the freezer may be the single most important decision that
Location will extend its life and ensure economical, high performance. We
recommend that you put the freezer in the coolest place possible because it
will use less power and last longer. Although the freezer operates in
environs up to 40°C (104°F), we suggest that you not constantly run it at the
upper end.
Avoid direct sunlight, warm draughts etc. Allow adequate space for doors to
open and close properly. Self-closing doors have internal torsion bars
pretensioned at the factory, and must be unobstructed. Ensure the cabinet
sits on a level surface so that the doors shut and correctly seal. Level footing
also prevents the condensate tray from overflowing.
Ventilation See diagram below for ventilation guidelines. When positioning the freezer,
ensure there is at least a 200mm space above the top panel. Adequate
ventilation around the refrigeration unit is essential for efficient operation.
The air surrounding the refrigeration unit must not exceed 40°C. Keep the
ventilation slots at the top of the cabinet clear at all times and never store
cardboard cartons or other objects on top of the freezer.
Installation
User Manual
35°C to 40°C
ambient
Requires 400mm space
above top panel
25°C to 35°C
ambient
Requires 300mm space
above top panel
Less than 25°C
ambient
Requires 200mm space
above top panel
5