1
Download OPERATION MANUAL
Transcript
5 Basic application x-touchBOX/PANEL Version 3.0 5.1 Addressing and grouping 5 Basic application This chapter contains the following topics: Addressing and grouping Scenes (S) Sequences (SQ) Schedules (SDL) Schedule list (SDLL) Hint In order to facilitate programming and operating steps, you can assign names to groups, scenes, sequences and schedules (see "Assigning names", page 16). 5.1 Addressing and grouping To enable communication of x-touchBOX/PANEL with the operating devices, every operating device of the system must be individually addressed and assigned to a group. Addressing is performed automatically, grouping must be done manually. For the subsequent operating devices, the address number is supplemented with the specific abbreviation. Identification of the components is only displayed if this is supported by the units. EM HID LV INC CONF LED Somfy The dialog box Addressing method provides two ways of addressing: System extension Only newly added operating devices are addressed. The existing addresses remain unchanged. Reinitialization All operating devices of the system are re-addressed. The existing addresses are overwritten. After automatic addressing, the addresses (1 to 64/128) and, if applicable, specific operating devices are indicated (e.g. HDI). 19
