Download Manuel utilisteur

Navigator Modulation Analyzer 1.6.x user’s manual – 09/2008
6.4. Measures button
6.4.1. General points
Pressing the Measures button (or going to the menu “Views”Æ”Measures”) switches the
display to all measurement tabs. This does not trigger off value acquisitions; the graphs
and their former values are displayed.
After having selected a configuration, the recording of measurements is launched by
pressing on the “Start” button (or going to the menu “Measures”Æ”Start”, or using the
shortcut ‘s’). From this moment on, all selected tabs (see § 6.2.2) are simultaneously
and continuously refreshed; time graphs store the measurements that, are not visible on
the graph. Data is viewed by clicking from one tab to another. The process is the same
for the RDS tabs.
Tabs composed of several graphs enable related data to be viewed in a grouping. This
view is divided into two lines; the first line has three or four smaller graphs, the second
contains the larger working graph. Contents of the large graph are chosen by clicking on
one of the graphs on the first line.
This working graph can incorporate advanced functions, depending on its type. These
functions include zoom, markers and maximum hold capabilities.
To view the RDS, press the “Stop” button (or go to the menu “Measures”Æ”Stop”, or
using the shortcut ‘h’) This is the only way to see the data (since the first measurement).
The “Reset” button (or the menu “Measures”Æ”Reset”, or using the shortcut ‘r’) resets
the displayed minima and maxima. If the option “The Reset button acts as restart” is
checked (see § 6.4), clicking on the “Reset” button stops the current capture and starts
a new one.
Page 36
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 – [email protected] – www.audemat.com