Download M5213BADGE

M 5 2 1 3 B A D G E
U S E R
M A N U A L
0 7 / 0 7 / 0 5
FEATURES
M5213BADGE is a low cost development system for the Freescale MCF5213 ColdFire
microcontroller. Application development is quick and easy with the included DB9 serial cable
and dBUG firmware monitor. The BDM port is compatible with standard ColdFire BDM / JTAG
interface cables and hosting software, allowing easy application debugging and development
with a variety of hardware and software tools.
Features:
♦ MCF5213 CPU, 100 pin LQFP
* 256K Byte Flash (on-chip)
* 32K Byte SRAM (on-chip)
* DMA Controller w/ four 32-bit Timers
* Interrupt Controller
* 8 Channel 12-bit A/D
* QSPI, IIC, and CAN Serial Ports
* 3 UART Serial Ports with DMA capability
* Edge / Interrupt Port
* 8 PWM timers
* 4 16-bit GPT Timers
* BDM / JTAG Port
* Internal 8MHz Oscillator
* 3.3V operation
* Up to 80MHz operation
♦ 8MHz reference crystal, up to 80MHz operation
♦ MCU port, 80 pin I/O port
♦ BDM / JTAG Port, 26-pin development port
♦ UART0 / Terminal Port w/ RS232 DB9-S
Connector
♦ UART1 Port w/ RS232 DB9-S Connector
♦ CAN port w/ 1Mb CAN transceiver
♦ RESET switch and indicator
♦ ABORT (IRQ7) switch
♦ 4 User Indicators (LEDs)
♦ 2 User Push Switches
♦ Regulated +3.3V power supply w/ indicator
M5213BADGE
Specifications:
Board Size 3.5” x 5.0”
Power Input: +5 - +16VDC, 9VDC typical
Current Consumption: 100ma typical @ 9VDC input
The M5213BADGE is provided, operating the Freescale dBUG monitor firmware. The monitor
allows serial interface to a PC host for file loading and terminal command line operations.
Additional hardware and software development tools are available, but not required.
4