Download USER`S MANUAL
Transcript
HOW TO USE THE MANUAL MODE Note: After you press a button, it will take a moment for the ramp to reach the selected incline level. 1. Touch the screen or press any button on the console to turn on the console. 4. Follow your progress. See HOW TO TURN ON THE POWER on page 22. The console offers several display modes. The display mode that you select will determine which workout information is shown. 2. Select the main menu. When you turn on the console, the main menu will appear on the screen after the console boots up. To select the desired display mode, simply flick or slide the screen. You can also view additional workout information by touching the red boxes on the screen. Touch the home button in the lower left corner of the screen to return to the main menu at any time. If desired, keep your pedaling speed near the target rpm. The target zone meter will prompt you to increase, decrease, or maintain your pedaling speed. 3. Change the resistance of the pedals and the incline of the ramp as desired. Touch the Start button on the screen, press the Manual button on the console, or begin pedaling. If desired, adjust the volume level by pressing the volume increase and decrease buttons on the console. As you pedal, you can change the resistance of the pedals. To change the resistance, press the Resistance increase and decrease buttons on the console or on the right handlebar. Note: After you press a button, it will take a moment for the pedals to reach the selected resistance level. To pause the workout, touch one of the menu buttons on the screen. To continue the workout, touch the Resume button. To end the workout session, touch the End Workout button. To vary the motion of the pedals, you can change the incline of the ramp. To change the incline, press one of the numbered Quick Power Ramp buttons on the console, press the Quick Power Ramp increase and decrease buttons on the console, or press the Ramp increase and decrease buttons on the left handlebar. 24