Download TRANS-AUTO AUTOMATIC START UNIT FOR

3. Front Panel Description And Accessing To The Parameters
3.1 Front Panel Description
15 16 17
1
4
2
19
3
21
ü20
22
23 24 25
9
7
10
28
18
29
11
30
27
31
12
8
13
32
14
33
Number Comment
This LED indicates that a "Shutdown" alarm was detected.
1
This LED indicates that a "Warning" alarm was detected
2
This LED indicates that a "Maintenance" alarm was detected
3
This LCD display is used for displaying the electrical measurements during normal operation,
4
7
8
9
10
11
12
13
14
and editing/inspecting programming parameters in program mode.
This LED shows that the load is supplied from the generator.
This LED indicates that Generator voltage and frequency is within limits and is ready to take over
the load.
This LED indicates that the engine has started and is running.
This LED shows that the unit is in the AUTO mode.
This LED shows that the unit is in the TEST mode.
This LED shows that the unit is in the MANUAL mode.
In the MAN, AUTO and TEST modes, this LED indicates that the engine is starting up or is
running.
This LED shows that the unit is in the STOP mode.
7