Download USER`S MANUAL

ASSEMBLY
Make Things Easier for Yourself
• As you assemble the weight system, make sure
all parts are oriented as shown in the drawings.
Everything in this manual is designed to ensure
that the weight system attachment can be
assembled successfully by most people. Most
people find that by setting aside plenty of time,
assembly will go smoothly.
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
The following tools (not included) are required
for assembly:
Before beginning assembly, carefully read the
following information and instructions:
• Two adjustable wrenches
• One pair of pliers
• Assembly requires two people.
• One standard screwdriver
• Assembly requires that the NTS7902 has been
assembled previously.
• One Phillips screwdriver
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Lubricant, such as grease or petroleum jelly,
and soapy water.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
Frame Assembly
B
1.
E
Before beginning, read the information in
the box above. This brief introduction will
save you much more time than it takes to
read it.
C
B
A
Remove the Button Head Bolts (A) and the Nylon
Locknuts (B) from the Stabilizer (C), the Base (D),
and the Weight Base (E).
1
D
A
Attach the Hack Squat Base (1) and the Weight
Base (E) to the Base (D) with the Button Head
Bolts (A) and the Nylon Locknuts (B).
2
2. Attach the Hack Squat Stabilizer (2) to the Hack
Squat Base (1) with two M10 x 68mm Carriage
Bolts (44) and two M10 Nylon Locknuts (51).
1
51
2
51
44
5