Download Owner`s Manual

TAmRon-sp
I
06~
I
3S0mmF/S.6
SOOmmF/8
CF TELE MACRO
CATADIOPTRIC LENS
OWNER'S MANUAL
II,
I
I
.
i
1111'
AOAPTALL-2 MOUNT SYSTEM
Welcome . . . .. to the ever·
expanding world of Tamron
Thank
you for selecting the
Tamron SP catadioptric lens. Before using your new Tamron lens,
take a few minu tes and carefully
read this in struction manual. This
way, you will beco me fully acquainted with the features and
proper method of operating your
lens in the norm a l and macro
modes. This will enab le you to
obtain the best possible resutls.
With prop e r handlin g and care,
your Tamron le ns will provide you
with ma ny years of e njoy able and
trouble-free operation.
1. DESCRIPTION OF PARTSAND SPECIFICATIONS
Model 068
Focal Length.
Aperture :
Const ruc ti on:
Focusing ring
Macro magnification
scale (w/2X teleconverterl
Macro magnification
scale
Distance scale---.....
Distance scale index
Mount index for all
Nikon cameras, Nikkomat
FT3 and other cameras
3
Angle of Vi ew:
Coating:
Lens Accessory Size :
M inim um Focus from
Film Plane:
Maximum Magnification
350mm
F/5.6
7 elements in 4 groups
7°30'
BBAR mult i-layer coat ing
30.5mm rear, sc rew- in (82mm front)
1. 1m (4 3.3 in ,)
( Iw/2X tel e-converte r:
1 : 2.5 11 : 1.251
F ocusing Ring Rotation :
Length (at infi ni ty) '
74.5mm (2 .9 in.l
Diameter:
Weigh t:
Lens Hood
Filter:
Optional Accessories :
86mm ( 3. 4in . )
535g I1 8,90z. 1
Detachab le, screw·in
A rear normal f ilter is supp l ied with y our lens
Rear filter set available consist ing o f ND4X,
Y 52, 056, and ABO . ND2X and 81 B also
ava il able separate ly.
F lat-field 2X tele-converter, tele-view adapto r ,
82mm "Normal" filter .
Focal Length :
Aperture:
Construction:
Focusing ring
Macro magnification
scale (w/2X teleconvE!rter)
Macro magnification
scale
Distance scale - - -....
Tripod mounting
ring fastening screw
Distance scale index
500mm
FIB
7 elements in 4 groups
Angle of View :
SO
Coating :
BBAR multi ·layer coating
Lens Accessory Size:
Minimum Focus from
Film Plane :
Maximum Magn ification
( )w12X tele-converter :
Focusing Ring Rotati on.
Length (at infinity);
Diameter :
Weight:
30.5mm rear, sc rew-in !82mm fron tl
1.7 m (66 .9 in)
1 : 3 ( 1 : 1.5)
87 mm 134 In)
84 rnm (33 In)
576 9 (20.2 ounce)
Lens Hood
Detachable, screw -in
Filter :
Optional Accessories :
A rear normal filler is supplied wit h your tens.
Rear filter set available consisting of ND4X,
YS2. 056, and R60. ND2X and 818 also
available separately,
Flat · field 2X tele-converter, tele-view adap tor,
82mm "Normal " filter .
Mounting index (in red) for
Nikkomat FT, FTN, EL
and FLW
Mount index for all Nikon cameras,
Nikkomat FT3 and other cameras
4
2. PRINCIPAL FEATURES
(1) Continuous Focusing - CF
Continuous focusing from infinity t o the
minimum objec t distance of 1.1 meters
Ifor 350mm F5.61 o r 1.7 m eters Ifor
500mm FS) is permitted. The m ax im um
macro magnification ratio at t he mini·
mum object distance of 1. 1 meters is
1 :2.5 (f or 350mm F5.61 or 1:3 (f or
500mm F8 at the m in imum object
distance of 1.7 meters).
121 Tolo·Macro Capability
Y our new mirror lens features a "telemacro" capab ility which permits photo graph ing an object in m acro mode as
close as 1. 1 m eters Ifor 350mm F5.6 1 o r
1.7 meters Ifor 500mm FB I.
The lens has opened up new horizo ns for
macro photography which have been
almost impossible in the past; you can
photograph objects which were normally
restricted, d istance wise, such as insects.
timid animals, accessories in a show window, birds in a cage, etc. in mac ro mode
without c losely approach ing the obj ect.
(3) Constant F ·Number
A convent ional fixed focal length lens
requires troub lesome F/stop calcu lations
depending on the object distance.
Tamron's innovative focusing system
allows you to maintain a constant light
transmission while focusing so that the
F-number does not change at any focus
settings from infinity to close up
(macro ), Therefore, you can obta in
optimum exposure time without any
correction even in auto flash photography. which so far, required obta ining
a corrected va lue by means of guide
numbers. In add ition, w ith the te lemacro capab ility of the T amron mirror
lens permitting the use of an auto flash
at the m ini mum distance of 1.1 meters
(f or 350mm F5.6) or 1.7 meters, (for
500mm FB), high-speed macro photography utilizing an auto f lash is possibl e.
(4) Silver-Evaporated Reflex Mirrors
In order to increase fight transmission
eff ic iency, your new Tamron mirror lens
incorporates specia l silver-evaporated reflex mirrors rathe r than the conventional
mirrors whose su rfaces are coated with
alumi num. With two reflex mirrors, the
total reflection percentage within a lens
havin.Q aluminum -coated mirrors becomes 60% or less. However, Tamron h as
succeeded in obtaining a reflection perce ntage as high as 80% or more with the
sil ver-evaporated reflex mirrors. Th e
specia l sil ve r evaporat ion which is applied to the reflex mirrors is extremely
durable. The degree of durability ex·
ceeds t he requirements conta ined in the
MIL standard by more than th ree times
thanks to Tamron's ori ginal coat ing
t echnique employing a combination of
a single layer of metallic coating and two
layers of high molecu lar fi lm s.
(5)
Unique and Convenient Outer
Design
In designing the outer appearance of the
lens, emphasis was put on the maximum
handling convenience by concentrating
all the necessary in formation in one
place where it can be easily read. Most of
Tamron lenses, including your new lens,
are marked with the maximum macro
magn ification scale to be applied when
Tamron's SP 2X tele-converter is used .
6
PRINCIPAL FEATURES
(61
Expanded Vistas of Photography
By Employing An SP 2X High-
Performance
T.'.~onvert8r
Tamron's SP 2X tere -converter is a highperformance converter in the Adaptall
system. It was specially developed for
exclusive use with the telephoto and
zoom lenses in the SP and Adaptall-2
series. The combina tion of the tereconverter and your Tamron mirror lens
greatly expands the conventional range
of photography as follows :
a.
The
combination
of
the
tel econverter and the lens permits expanding the range of the macro magnification ratio from 1 :2.5 to 1: 1.25
Ifor 350mm F5.61 or 1.3 to 1: 1.5
Ifor 500mm FBI which is almost life-
171 Adaptall Custom Mount System
Via Tamron's exc lusive Adapta!! custom
mount system, your new lens can be
used with virtually any popula r single
lens reflex camera .
size .
b . The tere-converter and lens combine
to make a very compact 700mm (for
350mml or 1000mm 1500mm l ul tra
telephoto that is convenient to carry
around .
SP 2X
Tele-converter
SP 500 mm
(Model 556 )
Ad aptall
mount
Camera
7
Mount
Lens
3.
INSTALLING AN[) REMOVING THE TAM RON ADAPTALL
CUSTOM MOUNT
mounts for Canon FD. Minolla and
Nikon is the same as described in
Steps 1 and 2. however, the custom
i.
Align the green dot on the custom
mount with the matching green dot
on the lens barrel and turn the mount
c lockwise until the mount is locked
(clicks ) into th e proper position .
2. Move the meter coupl ing lever
9" provided on the custom mount
so th at it engages in the slot provided
o n the lens and now the aperture of
the lens w ill coup le to the exposu re
con tro l mechanism of your camera.
The method of installing custom
mount for Canon FD, Minolla and
Nikon have two coupl ing levers
9 . Therefore. when the mount is
installed, engage the two coupli"ng
levers in the corresponding slot~
•
on both sides of the lens.
Note 1. When Fitting The Custom
Mount For Nikon with 500mm Mirror
Lens.
A I With A ll N i kon Cameras and The
Nikkormat FT3 :
For use with Nikon came ras and the
Nikkormat FT3 l and also all other
brand SLRs) the rear ring of the
SP500mm is set during manufacture
with the two green dots aligned
together. Therefore with the above
cameras be sure to use the lens in
this position. With AI syst em cam eras
push th e exposu re meter coupling
lever on the camera upwards t o prevent the lens from cross-coupli ng t o
the meter. This all ows the lens to be
used in the stop-down metering mode
in the same manner as a Nikon lens.
(Pi cture © on next page.)
8
INSTALLING AND REMOVING THE TAM RON ADAPTALL
CUSTOM MOUNT
BI With Nikkormat FT , FTN, EL and
E LW :
.
As explained on the label affixed on
the rear cap of the lens, slacken th e
red screw on the rear ring wi th the
sc rewdriver supplied, and turn the
ring clockwise all the- way until it
stops. Th en retighten the screw. Th is
allows the lens to be used in the stopdown metering mode in th e same
manner as a N ikon lens. (P icture@ )
Note 2 . When
Fitting
Th e Custom
M ount For Nikon w ith 350mm Mirror
Lens:
9 '----
Al With Nikon Photomic and Nikon
Ph otomic S:
Slacken the red screw on the rear ring
with the screwdriver supplied and use
the lens at this position.
B ) For al l other Nikon and Nikkormat
cameras, use th e lens as it is. (N o
ad ju stnient is necessary)
3. Y ou r
fitted
Tamron
with
an
lens which
is now
Adaptall
custom
mount can be secured to your came ra
in th e sam e manner as the came ra
manufacturer's lenses.
4. Removing the Cu stom Mount:
An L -shaped mount release lever is
provided direct ly oppos i te the aperture indicator window which, when
depressed.releases the mount. Therefore, whi le keeping the L -shaped
mount release lever depressed, turn
the custom mount counterc loc kwi se
until it stops and then li ft the mount
off th e lens.
4. OPERATING INSTRUCTIONS
(1) Correct Method of Handling
a Long Telephoto Lens and
ciency in hand-held photography w ith a
long telephoto lens, shutter speeds
slower than 1/500 second may also be
used.
Using It with a Tripod.
Compared with t elephoto lenses normally used (i .e. 135 to 300mm ). the angle of
view of your lens is considerably narrower, which can possibly cause " camera
shake" problem s when the shutter is
re leased. The refore, taking tids into can·
sideration, follow the recommendations
as desc ribed be low when you use the
lens.
a. Hand·Hold Photography
(2) Focusing
While lookin g through your c&mera 's
viewf inder, tu rn the focus ing r ing until
you see a sharp image. If your camera
accepts different focus ing screens, then
it is advisable to use a matte-fresnel
sc reen. This type of scree n is normally
recommended for ultra-telephoto lenses
and it wi ll make focusing easier.
Note : Since your mirror lens is an ultra·
telephoto lens, th e position of the dis·
tan ce sca le index and infinity mark are
I.
H o ld th e focus ing ring of th e lens with
your left hand. Draw the came ra near
and hold it firmly against your face w ith
left hand . I f y ou wear glasses, fix the
viewfinder frame securely against the
glasses. The slowest shutter speed which
permits hand·held shots is normally can·
sidered to be 1/focal length of the lens.
Therefore, wi t h your lens. it is recommended that you use ·a shutter speed of
1/500 second or faste r , h owever, depending upon the extent of your prof i·
b. With Tripod :
I t is recommended t o u se heavy duty
tripod when using a long telephoto lens.
A lso use cab le release for shutter releasing.
10
OPERATING INSTRUCTIONS
moved slightly to the positive side. (In
case of SP 350mm lens, this position is
marked with L -shaped mark on the distance scale).
tI
00
o
SP
-
MM
OR • • _
C OU. 1:t
1: 1
F
00
M
1.7
~
I
-
THE M
5° BBAR
,.
I
b . Focusing I n M acro Mode
The depth -of-f ield becomes extreme ly
shallow when you use an ultra-telephoto
lens in the macro mode. Y ou should first
practice focusing prior to photographing
any subjects and you may also want to
take a test roll of film. If your camera
accepts interchangeable screens you
should use a cross-screen and in addition,
a viewing magnifier would greatly assist
you.
(3) Macro Operation
The Tamron mirror lens has a new feature which permits continuous focusing
from infinity to macro and no additional
special operation is required for macro
use. On the focusing ring, the macro
magnification ratios are shown in orange.
In addition, the magnification ratios for
use with the SP 2X tele-converter {which
doubles the focal length of the lensl are
engraved in yellow. Simply set the lens
at the d esired macro magnification scale
and then focus the lens.
Note for custom mounts which have an
aperture scale
(Noto for 500mm Ions'
Some custom mounts such as Nikon AI
and Minolta MD have an aperture scale
which is visible in cameras which have
this fac il ity. When fitting the custom
mou n t simply al ign the green dot on the
mou n t w ith the matching green dot on
the lens barrel as described in the
owner's manual. Please note that as the
SP 500mm lens has a f ixed aperture of
F/8 th is value is transmitted to t he
camera irrespective of the fact that the
aperture display on the mount shows
F/4. Similarly. when the 01 F flat fie ld
2X teleconverter is used the effective
aperture value of F/16 is transmitted to
the camera although the aperture display
on the mount again shows F/4, and FIB
is indicated on the body of the te lecon·
verter itself. As ment ioned the above has
no effect in ac t ual picture tak ing as the
co rrect exposure value is always trans·
mitted to the camera.
(4) Lens Hood
A lens hood is supplied w ith the Tam ron
lens, The lens hood prevents unnecessary
light f rom stri king the lens and caus if4g
unwanted glare. The lens hood suppl ied
is detachable, screw-in type hood em ·
p loying a very conven ien t system,
a. T o attach the hood, rotate it i n the
clockwise direction onto the thread
provided on t he front end of t he lens.
b. When t he lens is not in use, detach
the hood f rom the lens, reverse it and
pu t it on the lens barrel.
12
OPERATING INSTRUCTIONS
(5) Installing Filters
Your mirror lens accepts 30.5mm rear
screw-in filters. Since the focusing
system of the lens is precisely adjusted
with a filter fitted, you must use a filter
at all times to obtain the optimum per·
formance. For this reason, a normal
(general purpose) filter is fitted to your
lens at the factory. A set consisting of
ND4X. Y52. 056 and R60 filters is
available as an optional extra. ND2X and
81 B filters are also available separately.
I n order to remove a fil ter it should be
unscrewed by turning it anticlockwise.
To fit another filter simply screw it on
clockwise making sure it is not overtightened as otherwise it may be diffieu I t to remove. When you wish to
replace filters. it is easier if the custom
mount is removed from the lens. I t is
best to use filters which have been
precision engineered for ultra tele photo
lenses and hence th is is the reason the
above mentioned filters are available.
You should always hold the filter by
its rim and not by the glass surface
because finger prints, etc. can damage
13
(6) Mountinq and Removing
the quality of your pictures and possibly
damage the filter coating.
The Tripod Ring
(1) For 500mm lan,
The tripod ring can be mounted or re o
moved as shown in photo (,A ) by tighten ·
Ing or loosening the two tripod ring
mounting screws. In addition, by loosening the tripod fastening screw provided
on one side of the ring, you can se lect
0
any posi t ion within 360 , thus com·
manding free camera movement, ~hori·
zontally or vertical ly. When you are
mounting your camera and lens on a
tripod, you shou ld always use the tr ipod
mounting ring and not the t r ipod socket
on your camera because the tr ipod ring
will provide you with maximum stabil i ty
and convenience.
Note : The tripod mounting r ing should
be fitted with the fastening screw near
to the back of the lens as otherwise the
ring may fou l th~ camera body.
When mounting the lens on a tripod. do
not tighten the fastening screw of the
tripod's universal head excessively-as
otherwise the fastening screw may come
into contact with the focusing ring of
the lens (see Fig. 1). (I fit touches the
lens. the focusing ring will become
inoperable.)
(2) For 350mm Ions
The tripod mounting base is built-in on
the SP 350mm lens. The base can be
rotated in 90 degrees :push the L-shaped
lever at the rear end of the lens barrel
and turn the lens until the lever clicks.
14
5. SPECIFICATIONS OF TAM RON LENSES
~o
O'B
02B
52B
03B
04B
54B
06B
Focal Length
17rnrn
24mm
28mm
gOmm
135mm
200mm
300mm
350mm
500mm
Aperture
F/35
F/2 5
F/2.S
F/2.S
F/2.S
F/3.5
F/56
F/56
FIB
'04
B4
75
27
18
12"
10/12
9/10
m
BIB
4/4
515
siB
4/7
4/7
0.25 (9.8)
0.2519.8)
0.2519.8)
1.7 166.91
Angle of View (degrees)
Len, Construction
(Groups/Elements)
Coating
Minimum Focul from Film
Plane m lin.!
Aperture Range
55B
73
BBAR multiple layer cooting
Maxi mum Magnification Ratio
0.39115.3)
1.2 (47.2)
12
3.5 22AE
2.5--22AE
2.5 32 AE
2.5 32AE
2.5-32 AE
1.4 155.11
1.1 (43.3)
1.7 (66.9)
1.5.9
13.3
125
13
3.5 32 AE
5632AE
49mm
58mm
58mm
58mrn
3O.5mm
30.5mm
Length mm lin.)
43
38 ( 1. 5)
33 (1.3)
66 (2.6)
79.5 13. 11
108/4.3 )
163.516.4)
74.512.9)
87 (3.4)
Diemeter mm (in.)
7012.8)
64.5 12.5)
64.512.5 )
64.512.51
64.5 (2.51
68.5 (2.7)
64.5 (2.5)
86 (3.4)
84 13.3)
Weight gram (01: .)
270 (95)
230 (B.1)
IBO 16.3)
420 (14.BI
410114.5)
540 (19.0)
610 (21.51
577 (20A)
575 (20.3)
Built·in tYpe,
retractable
Builtin type,
retractable
Built in type.
retractable
Screw In type.
delachllble
Screw·in. IVpe
detacheble
FilterSiu
Len5 Hood
15
I
5'B
Specifications
55mm
(1.7)
49mm
Push·on type
Screw·in type
Screw in type
Screw·in type
(optional ex Ira) (oPtional extra) (optional extra) (optional extra)
'3A
07A
09A
O'A
20A
52A
103A
104A
05A
06A
OlF
24-48mm
28-50mm
35-70mm
35_BOmr'n
70 lbOmm
70-210mm
aO_21Qmm
7S-2S0rnm
7Q-350mm
200 -500mm
2X the focal length
01 original lens
F/3.5-38
FJ3,S-4.5
Ff35-45
F/2.8-3.8
F/35
F/35-4
F/38-tl
F/3.B-45
F/45
F{69
84-48,5
75-47
64-34
64-30
34-16
34-11
30-113
32-10
34-7
12 -5
9/lD
9/9
7/7
B/9
10/13
15/16
10113
10/13
13/15
8114
BBAR and
green multiple
BBAR multiple laver coating
5/6
BBAR multiple laver coating
layercoalmg
0.6 (23.6)
0.25 (9.8)
0.25 (9.B)
0.27 (1061
0.7127.5)
0.75 [29.5)
0.9 (35.4)
1.2 (47.2)
1:4
"2.B
12.5
1:3
12
1 28
13.4
2.5 (98,4)
3.0 (118)
6.9-32
2.8/3.8-32AE
3.5--32 AE
3.5/4-32 AE
3.8/4 -32 AE
3.8/4,5-32 AE
45-32 AE
77mm[on hood
58mm
58mm
62mm
49mm
58mm
58mm
62mm
82mm
82mm
6112.4)
46.2 [1.8)
56.512.21
72 12.81
9913.91
16516.51
142 15.61
176.517.01
274110.81
370114.61
42.5 11.71
64.512.51
64.712.51
64.5 (2 .51
64.512.51
64,512_51
64.5 12 .51
65 (2.51
7112.81
90 13.51
9013.51
64_512.51
346112.21
297110.51
322111.41
386113.61
2770(97.7)
250 (8.8)
3.5/3.8-32 AE 3.5/4-.5-32 AE 3.514,:..0-32 AE
Bayonet type
Push-on type
PUSh -on type
PUSh-on type
[optional extra) (optional extra) (optional eXlfa) (op t ionol f'x \rll)
459116.21
750 (26.5!
BUilt in type.
retractable
Built·in type.
re t ractable
634(22.'11
Screw·in type
856130.21
2170176.51
Built·in type.
retractab:e
Builtin type.
retractable
Built in type.
retractable
16
5.
i
SPECIFICATIONS OF TAM RON LENSES
~o
...
"8
068
568
llA
07A
09A
01A
2QA
52A
lOlA
104A
OSA
06A
01F
200mm
300mm
350mm
500mm
24-48mm
28-SOmm
35-7Omm
35-80mm
70- 15Omm
70-210mm
BO_210mm
75-250mm
70-350mm
lOO-500mm
2X lhe locallefl91h
F/ 2.S
F/3.5
F/S.6
F/5 .6
FIB
F/3.5 3.B
.F/3.5 4 .5
F/3.5 4.5
F/2.B 3.B
F/3.5
F/3.5 4
F/3.B 4
F/3.8 4 .5
F/4 .5
F/69
lB
12·
B4 48.5
75 _ 47
64-34
64-30
34 l B
34 11
30- 11.3
32 10
34 7
4/4
5/5
9/lD
9/9
7/7
B/9
10/13
15/16
10/13
10/13
13/ 15
5 1.
018
028
.2.
038
FOall LenGth
17mrfl
24mm
28mm
90mm
135mm
A~rtur.
F/3.5
F/2.S
F/2.S
F/ 2.S
104
B4
75
27
10/12
9110
7/7
B/B
Spec:Hieations
Ana" of View (degr_ J
Lens Construction
(Groups/E t."..,... ,
Co.ling
Minimum Focu. fro m Film
Pt.". m tinJ
0.2519.81
0 .25 (9.8)
15
0 .39 (15.3 )
1.2 (47.21
1:2
3 .5 22AE
Filt.,Sir_
4/7
4/7
1.7 166.91
1.4155. 11
1. 1 (43.3 1
1.7 (66.9 )
1:5.9
1:3 .3
1:2.5
1:3
2.5--22AE
2.5 32AE
2.5 32AE
2.5--32 AE
3.5 32 AE
5 .6-32 AE
55mm
49mm
49mm
58mm
58mm
58mm
30.5mm
163.5 16.4 1
74.5 12.9)
8 7 (3 .41
64.5 (2.5)
8613.4)
84 13.3)
540 GI9.0)
6 10 (21.5)
577 (20A )
5 75 /20.3 1
Built·in type.
retractable
Built·in ty pe.
retractable
Screw·in type.
d etachllble
Screw·in. type
detachable
43 11.71
38 (1.5)
33 11.3)
66 (2.6 )
79.5 13. 11
10814.;n
70 12.B)
64.5 12.5)
64.5 (2.5 )
6 4 .5 (2.51
64 .5 12.51
68.512 .71
W_ighlgrem(or .1
27019.5)
230 18. 1)
180 (6.3)
4201 14.81
4 1011 4.51
Buil t·in type.
ret ractable
Push·on type
Screw·in type
Screw·in type
Screw·in Iype
(optional extra) (optional extra) loptio nal eK tral (optional extra)
green multiple
layer coaling
5
8114
5/B
BBAR mulliple laver coa ling
0.2519.8)
0.25 19.8 )
0 .27 110.6 1
0.7127.5 )
0.75129.5)
0.9135.4)
1. 2147.2)
1:4
1:2.8
1:2.5
1:3
1:2
1.2.8
1:3.4
2.8/3.8 32AE
3.5-32 AE
3.5/4 32 AE
3.8/4 -32 AE
3_8/4 .5_32 AE
3 .5/3.8 32 AE 3.5/4'. 5-32 AE 3 .5/4 .:... 32AE
3O.5mm
Dtem.tw mm lin.)
0.6 (23.6 )
12
of original lens
BBAR and
BBAR mul t iple laver coating
L_ngth mm lin.l
Lens Hood
5/B
BBAR multip le layer coati ng
0.2519.8)
Muimum Mlignific8lion Relic»
AperturllRe,...
7.3
77mmlon hood
58mm
58mm
62mm
49mm
58mm
6 1 [2.4)
46.21 1.81
56.512.2)
72 12.8 )
99 13.9)
165 (6.5)
142 15.6 )
64.5 (2.5)
64.7 12.51
64.5 12.5 1
64 .5 12.5)
64.512.51
64.5 12.51
346 112.21
297110.51
322111.41
3861 13.61
4591 16.2 1
750 (26.51
Bayonet type
Push·on type
Push·on type
Push·on Type
(optional ex tra) (optional e)(lra) (optional extra) (optional ex tr a )
Buil t·in type.
re tr actable
Built-in type.
retractable
58mm
2.5198.4 )
4.5 32 AE
3.0 (118)
6.9-32
62mm
B2mm
B2mm
176.5 (7.OJ
274 (10.8)
370 (14.6)
42.5 (1.7)
65 12.51
71 12.8 1
9013.5)
9013.5)
64.5 (2.5)
634122.4)
856130.21
2170176,5)
2770197.71
250 (8.81
BuilT·in TYpe,
retractab:e
Built·in Type.
retractable
S:rew·in type
BuilT·in Iype.
retractable
16
6. TAMRON ADAPTALLjADAPTALL-2 MOUNT SYSTEM
<:>
A<ial' , . IIMounl,
ForPeflluES
0
o
For Pen'" l)'Irvers&1
For Nil<0I1 Al t
For FUIC. ST
forM.lmty'SX
For Topcon
Re o
for RoUeo'Voog!lancJe.
For MonoUa
Fo. Ol vmPl's OM
(. (
fo' Con la. IYashlC;a '
For Canon FO '6mountsl .
1 25, 128, 1 35.138,145,156
For Komea AR (6mounlsl "
1 25.128.135. 138, 145, 156
For Mlnalt. MD (4 mOlml51
12,5 45, 12856.135. 1 38.
For Olympu s OM
fo< ICon ell A.R -
fOfCon!(UYash!C.
For "e" mount for eCTV VTR
c:ame.,u lind 16mm
for " MS" mounl
mo~ ..
cilme,n
'0< eCTV VTR
Due to small rear aperture, this mount will not accept the SP
70-210mm 1/3.5-4, SP 90mm 1/ 2.5, SP Flat Field 2X Converter. and Adaptall-2 80-210mm 1/3.8-4.
t
Some early Nikon Al Adaptall mounts cannot be used with
the above lenses . Please check with your dealer.
Mount requires initial maximum aperture adjustment.
(e) Does not have aperture stop down control on mounts . SP
lenses do not have AutolManual selector switch.
"
Will not accept the SP Rat Field 2X Converter, due to its small
inside diameter.
Note: The Tamron SP Rat Field Tele-Converter is compatible
with most Tamron Interchangeable Lenses, except wide
angle lenses . However, be sure to use the appropriate
mount.
7. CARING FOR YOUR LENS
1. Avoid touching the su r·
face of your lens. When
not using your lens, be
su re to put the lens cap
on for protec tion.
3. Wh en carry ing a zoom
lens mounted on your
camera, hang it from
your shou lder w ith the
lens towards your body
to protect it from objects
that ii m ight hit.
5. Always stor e your len s in
a cool, dry place. During
humid or wet wea th er it
is an especially good idea
to store it wi th the sil ica
ge l packet that was suP
plied with your lens.
2. Clean ing your lens :
a.
Use a photographic
lens brush to remove
dust o r dirt from the
surface.
b. Moisten a lens clean ing tissue with o ne
drop of cleaning so lu ·
tion and clean the
surface gently.
c.
Remove excess moisture from the lens sur face Wi th a dry ti ssue.
4.
Fi ne photographic equ ip·
ment ca n be delicate.
Protect
it
from
any
avoidable impact.
18
TAMRON International Service
Should any TAMRON product require service, TAMRON's international service is available
in over 48 nations worldwide .
TAmRon CO.,LTD.
Manufacturers of lenses for photographic, industrial, laboratory, video, and scientific applications.
Tokyo Main Office
Tamron Bldg., 17-11, 7·chome, Takinogawa, Kita-ku, Tokyo, Japan
Tel: (03) 916·0131 T elex : J23977 TAMRON Cable: "TAMRONTAIS EI TOKYO"
58023000U Printed in Japan