Download MultiBuffer™ DS-1 User Manual

Control with SGI or Unix Platforms
hphase
Syntax:
hphase buffer 1 | 2 | 3 | 4 [htiming
val] Set or display the horizontal timing value for
the selected buffer.
Example: display H phase value of Buffer 2
ds1% hphase b2
hphase buffer 2 is -162
Example: Set Buffer 1 Hphase to +24
ds1% hphase b1 24
vphase
Syntax:
val]
vphase buffer 1 | 2 | 3 | 4 [htiming
Set or display the vertical timing value for the
selected buffer.
Example: display V phase value of Buffer 1
ds1% vphase b1
vphase buffer 1 is 3
Example: Set Buffer 1 Vphase to +24
ds1% vphase b1 24
vphase buffer 1 is 24
ds1%
89