Download 1746-RM001A-US-P, BASIC Language Reference Manual

Transcript
BASIC Command, Statement, and CALL Quick Reference Guide
Active In
Command
Mode
Only
B-5
Mnemonic
Required PUSHes or POPs
Description
Page
CALL 90
PUSH [remote device node address]
PUSH [remote device file number]
PUSH [remote device file type]
PUSH [starting element offset (x2) of remote
device file]
PUSH [number of elements to be transferred]
PUSH [message time-out value]
POP [status of message instruction]
Read remote DH485 data file to BASIC input
buffer.
13-20
CALL 91
PUSH [remote device node address]
PUSH [remote device file number]
PUSH [remote device file type]
PUSH [starting element offset (x2) of remote
device file]
PUSH [number of elements to be transferred]
PUSH [message time-out value]
POP [status of message instruction]
Write module output buffer to remote DH485
data file.
12-18
CALL 92
PUSH [remote device node address]
PUSH [starting element offset (x2) of remote
device file]
PUSH [number of words to be transferred]
PUSH [message time-out value]
POP [status of message instruction]
Read remote DH485 interface file to module
input buffer.
13-23
CALL 93
PUSH [remote device node address]
PUSH [starting element offset (x2) of remote
device file]
PUSH [number of words to be transferred]
PUSH [message time-out value]
POP [status of message instruction]
Write module output buffer to remote DH485
interface file.
12-22
CALL 94
None
Print current PRT1 port setup.
12-24
CALL 95
PUSH [buffer selection]
POP [number of characters]
Get number of characters in PRT1 buffers.
11-10
CALL 96
PUSH [buffer selection]
Clear port PRT1 input and output buffers.
12-24
CALL 97
None
Enable port PRT2 DTR signal.
11-11
CALL 98
None
Disable port PRT2 DTR signal.
11-11
CALL 99
None
Reset print head pointer.
14-3
CALL 101
PUSH [starting address]
PUSH [ending address]
Upload user memory module code to host.
5-4
CALL 103
None
Print port PRT1 output buffer and pointer.
5-5
CALL 104
None
Print port PRT1 input buffer and pointer.
5-6
CALL 105
None
Reset port PRT1 to default settings.
14-4
Publication 1746-RM001A-US-P