Download 1746-RM001A-US-P, BASIC Language Reference Manual

12-16
Output Functions
Bit 13 of word 200 is the battery status bit. It can have one of the following values:
• 0 - Battery is good
• 1 - Battery is low
Word integrity is guaranteed during this transfer. File integrity is not. Handshaking
bits can be used in your application program to provide file integrity.
Syntax
CALL 54
POP [processor mode]
Example
>1 REM EXAMPLE PROGRAM
>30 CALL 54 : REM XFER BASIC OUTPUT BUFFER TO CPU INPUT IMAGE
TABLE
>40 POP X : REM LOGIC PROCESSOR STATUS IS IN X
>50 IF X<>0 THEN PRINT “PROCESSOR NOT IN RUN MODE”
READY
>RUN
READY
>
CALL 57 – Transfer
BASIC Output Buffer to
CPU M1 File
Purpose
Use CALL 57 to transfer up to 64 words starting at word 100 from the module
output buffer to the CPU M1 file starting at word 0. This routine has one input
argument and one output argument. The input argument is the number of words
to be transferred (1 to 64). If the number is not within the range 1 to 64, no
transfer occurs and the output argument is set to 10.
If the input argument is a valid number, then the output argument is the status of
the Logic Processor. It can have one of the following values:
• 0 - Successful transfer, SLC processor in Run mode
• 1- Successful transfer, SLC processor in Program mode
• 2 - Successful transfer, SLC processor in Test mode
• 10 - Illegal length specified
• 11 - SLC processor does not support this capability
Word integrity is guaranteed during this transfer. File integrity is not. Handshaking
bits can be used in your application program to provide file integrity.
Publication 1746-RM001A-US-P