Download LIAR - A Computer Program for the Modeling and Simulation

LOAD
52
[FDBK-GOLDI
Gold the feedbacks. The feedback
angle in the feedback marker.
BUNCH
RESET
0
.T.
reference information
Bunch number of updating information
Reset all setpoints to zero.
is updated to the actual trajectory
offset and
(O=average).
IFDBK-MISALI
The feedbacks are misaligned to the neighbouring BPM’s. This command allows the feedbacks to
follow the beamline misalignment, therefore only acting on the beam offset with respect to the beamline
misalignment (as in a real feedback). Actually the feedback reference information is adjusted.
NBPM
4
RESET
.T.
See the command
.
Number of up- and downstream BPM’s to consider
for beamline misalignment.
Flag for resetting previously assigned reference information.
PLGT!
Execute a command file. This command is identical to ’READ’ and ’EXEC’ . It can only be used from the
interactive command level. Do not use it within a command file! LIAR will read all commands from the
specified file and switch back to the interactive program level at its end.
FILE
-
Name of input command file (must be specified).