Download mikroPascal PRO - MikroElektronika

Transcript
mikroPascal PRO for dsPIC30/33 and PIC24
Soft_I2C_Init
Prototype
procedure Soft_I2C_Init();
Description Configures the software I²C module.
Parameters None.
Returns
Nothing.
Requires
Global variables:
- Soft_I2C_Scl: Soft I²C clock line
- Soft_I2C_Sda: Soft I²C data line
- Soft_I2C_Scl_Pin_Direction: Direction of the Soft I²C clock pin
- Soft_I2C_Sda_Pin_Direction: Direction of the Soft I²C data pin
must be defined before using this function.
Example
// Software I2C connections
var Soft_I2C_Scl
: sbit
Soft_I2C_Sda
: sbit
Soft_I2C_Scl_Direction : sbit
Soft_I2C_Sda_Direction : sbit
// End Software I2C connections
...
Soft_I2C_Init();
Notes
None
at
at
at
at
RF3_bit;
RF2_bit;
TRISF3_bit;
TRISF2_bit;
Soft_I2C_Start
Prototype
procedure Soft_I2C_Start();
Description Determines if the I²C bus is free and issues START signal.
Parameters None.
Returns
Nothing.
Requires
Software I²C must be configured before using this function. See Soft_I2C_Init routine.
Example
// Issue START signal
Soft_I2C_Start();
Notes
None
450
MikroElektronika