Download Operating Instructions

1000 Watt Powered Two-Way DJ Speaker W/USB/SD, Fm Radio,
3.5Mm AUX Input, Graphic EQ, & DJ Flashing Lights
WWW. Pyleaudio.con
Operating Instructions
PSUFM1045A
Specifications
PSUFM1045A
*Dual 10" Woofer And Two 3" Piezo Tweeter
*USB/SD Flash And Card Reader Function With FM Radio
*USB Provides 5v 1a Charge For Smart Phones And Other Devices
*Display Screen Shows Number Of Songs, Play Time And Fm Radio Frequency
*Bluetooth Compatible For iPhone And Most Smart Phones
*Portable Carrying Handles For Easy Transport
*Disco Lights With On/Off Control
*Two 1/4" Microphone Inputs
*One 3.5mm Aux Line Input With Cable (Compatible With All Mp3 Players
And Devices With Headphone Outputs)
*RCA Stereo Input And Output
*7 Band EQ With EQ ON/OFF Control
*Speaker Output Banana Plug For Passive Speakers And Model PSUFM1040P
*Ported Enclosure For Added Bass Response
*1000 Watts Peak / 500 Watt RMS Power @4ohm
*Woofer Magnet Weight: 25 Oz
*Sensitivity (1W/1M): 90Db
*Built In Crossover Network
*Crossover Frequency: 3.5kHz
*Frequency Response: 20Hz-20Khz
*35mm Speaker Stand Mount
*Ac 110/220v Power Switch
*Dimensions: 36.8" (H) X 15.2" (W) X 13.6" (D)
Safety Notes
1.Correct pow er m ust be us ed to o per at e t h is unit properly,
do not use an y ot her pow e rin g op tion s, c or ds or m ethods.
2.Carfully ha nd l e, pl ug a nd u npl u g th e po w er c able when handling.
Hold the pl ug w ith a fir m g r ip an d w he n pl u gg i ng or unplugging from
sockets.
3.Do not op en c has s is ! Ext erm ely d ang ero us! D o not put your hands
inside th e c h assi s. If th e de vic e be g in s t o malfunction do not
attempt to r e pair , unplug t he u n it an d co nta ct Pyle immediately.
4.Don't us e volat ile or da nge rou s c he mic al cl eaners on the unit
(like tol u ene , al coho l, g as olin e et c.) Use ge ntle cleaners.
5.Keep th e u n it in a w el l v e ntil ated e nv ir onment and keep away
from, dir e ct sunl ight t o prev ent u nit f ro m o verheating.
6.Protect the u ni t fr om mo ist ure o r ra i n.
Speaker Board Schematic
Guitar Input Jack
Prev Control
Guitar Volume Control
Echo Control
EQ Switch
Mic Volume Control
Bass Control
Mic Input Jack
Treble Control
17
Metal corner
Volume Control
18
Tweeters
Line - In / Aux Audio Input
19
Woofer Speaker
EQ Control
20
Vent Hole
Mode Control
21
Woofer confinement
Next Control
22
Speaker handle
USB/SD Jack
23
Speaker machine feet
Play /Pause Control
1
2
GUITAR.IN
GUITAR.VOL
4
5
BASS
TREBLE
3
6
17
7
VOLUME
LEVEL
EQ
dB -15 -10 -7
-4
-2
0
+1 +2
METER
Min
18
Max
ON
0
OFF
0
MIC.1
0
10
Min
M.VOL
22
10
M.ECHO
10 0
10
Max
MASTER EQUALIZATION
8 8 8 8
CH-
SCAN
+10
+8
+6
+4
+2
0
-2
-4
-6
-8
-10
CH+
MIC.2
USB
+10
+8
+6
+4
+2
0
-2
-4
-6
-8
-10
63
SD/MMC
160 400
1K
19
16
20
21
23
15 14 13 12 11
10 9
8
3K
8K 16KHz
Speaker Board Schematic
1
Fm Antenna
5
Line - Out / Aux Audio Output
2
Power Switch
6
Line - In / Aux Audio Input
3
Voltage Selector Switch
7
Vice-Box Power output
4
Ac Power Supply
8
The fan
5
ANT
1
6
OUT
IN
L
L
R
R
7
AUDIO OUT
ANT
OUT
IN
L
L
R
R
ON
AUDIO OUT
2
8
OFF
ON
POWER
OFF
220V
AC INPUT
CAUTION
3
RISK OF ELECTRIC SHOCK
DO NOT OPEN
110V
110V~220V
50Hz/60Hz
VOLTAGE
SELECTOR
VOLTAGE
SELECTOR
110V
220V
POWER
AC INPUT
CAUTION
4
110V~220V
50Hz/60Hz
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Instructions
Turning ON/OFF
The Speaker can be powered when connected to mains power.
1.Connect the power cable to the top of the unit.
2.Connect the other end of power cable to mains power.
3.Turn on the switch at the mains power point.
4.The unit will automatically power on when connected to mains power.
Instructions
Using the Wired Microphone
You can connect the wired microphone to this unit using the MIC INPUT
located on the top of control panel.You will require an adapter if your
wired microphone does not use a 1/4” plug.
1.Turn of the unit.
2.Connect your wired microphone to the MIC INPUT located on top of
the control panel.
3.Adjust the microphone volume by tuning the MIC VOL/ECHO knobs
located on top control panel.
NOTES: You can use the wired microphone(not included) and wireless
microphone at the same time.
Connecting a Guitar
You can connect your Guitar to unit using the 1/4” GUITAR INPUT plug.
1.Turn on the unit.
2.Connect your guitar cable to GUITAR INPUT port on top control panel.
3.Adjust the volume by turning the GIUTAR VOL on top control panel.
Instructions
USB/SD Card Playback
You can play music from USB stick or SD Card using the USB/SD slot on
the Speaker.
1.Turn on the unit.
2.Insert your USB or SD card into the slot.
3.Once you insert the USB or SD card, the unit will begin automatic play.
4.You can use the PRE/NEXT/PLAY/PAUSE controls to play music.
NOTES: The speaker system can play the following audio file formats:
MP3,MP4,WMA.The USB/SD Card no more than 32GB.It will need several
seconds to play when your USB/SD Card is full of contents.
Using the Radio
1.Turn on the unit.
2.Press INPUT just once, it is FM Radio.
3.Press PRE/NEXT to select the radio stations.
4.Ensure that you have an extended antenna located on the rear of the
speaker. It will ensure the best possible radio quality and signal strength.
5.At the first use of the radio, press NEXT button twice, it will auto search
and store the radio stations.
www.pyleaudio.com
tel: 718.535.1800 fax: 718.236.2400
1600 - 63rd StreetBrookIyn,N Y,11204