Download Operating Instructions
Transcript
1000 Watt Powered Two-Way DJ Speaker W/USB/SD, Fm Radio, 3.5Mm AUX Input, Graphic EQ, & DJ Flashing Lights WWW. Pyleaudio.con Operating Instructions PSUFM1045A Specifications PSUFM1045A *Dual 10" Woofer And Two 3" Piezo Tweeter *USB/SD Flash And Card Reader Function With FM Radio *USB Provides 5v 1a Charge For Smart Phones And Other Devices *Display Screen Shows Number Of Songs, Play Time And Fm Radio Frequency *Bluetooth Compatible For iPhone And Most Smart Phones *Portable Carrying Handles For Easy Transport *Disco Lights With On/Off Control *Two 1/4" Microphone Inputs *One 3.5mm Aux Line Input With Cable (Compatible With All Mp3 Players And Devices With Headphone Outputs) *RCA Stereo Input And Output *7 Band EQ With EQ ON/OFF Control *Speaker Output Banana Plug For Passive Speakers And Model PSUFM1040P *Ported Enclosure For Added Bass Response *1000 Watts Peak / 500 Watt RMS Power @4ohm *Woofer Magnet Weight: 25 Oz *Sensitivity (1W/1M): 90Db *Built In Crossover Network *Crossover Frequency: 3.5kHz *Frequency Response: 20Hz-20Khz *35mm Speaker Stand Mount *Ac 110/220v Power Switch *Dimensions: 36.8" (H) X 15.2" (W) X 13.6" (D) Safety Notes 1.Correct pow er m ust be us ed to o per at e t h is unit properly, do not use an y ot her pow e rin g op tion s, c or ds or m ethods. 2.Carfully ha nd l e, pl ug a nd u npl u g th e po w er c able when handling. Hold the pl ug w ith a fir m g r ip an d w he n pl u gg i ng or unplugging from sockets. 3.Do not op en c has s is ! Ext erm ely d ang ero us! D o not put your hands inside th e c h assi s. If th e de vic e be g in s t o malfunction do not attempt to r e pair , unplug t he u n it an d co nta ct Pyle immediately. 4.Don't us e volat ile or da nge rou s c he mic al cl eaners on the unit (like tol u ene , al coho l, g as olin e et c.) Use ge ntle cleaners. 5.Keep th e u n it in a w el l v e ntil ated e nv ir onment and keep away from, dir e ct sunl ight t o prev ent u nit f ro m o verheating. 6.Protect the u ni t fr om mo ist ure o r ra i n. Speaker Board Schematic Guitar Input Jack Prev Control Guitar Volume Control Echo Control EQ Switch Mic Volume Control Bass Control Mic Input Jack Treble Control 17 Metal corner Volume Control 18 Tweeters Line - In / Aux Audio Input 19 Woofer Speaker EQ Control 20 Vent Hole Mode Control 21 Woofer confinement Next Control 22 Speaker handle USB/SD Jack 23 Speaker machine feet Play /Pause Control 1 2 GUITAR.IN GUITAR.VOL 4 5 BASS TREBLE 3 6 17 7 VOLUME LEVEL EQ dB -15 -10 -7 -4 -2 0 +1 +2 METER Min 18 Max ON 0 OFF 0 MIC.1 0 10 Min M.VOL 22 10 M.ECHO 10 0 10 Max MASTER EQUALIZATION 8 8 8 8 CH- SCAN +10 +8 +6 +4 +2 0 -2 -4 -6 -8 -10 CH+ MIC.2 USB +10 +8 +6 +4 +2 0 -2 -4 -6 -8 -10 63 SD/MMC 160 400 1K 19 16 20 21 23 15 14 13 12 11 10 9 8 3K 8K 16KHz Speaker Board Schematic 1 Fm Antenna 5 Line - Out / Aux Audio Output 2 Power Switch 6 Line - In / Aux Audio Input 3 Voltage Selector Switch 7 Vice-Box Power output 4 Ac Power Supply 8 The fan 5 ANT 1 6 OUT IN L L R R 7 AUDIO OUT ANT OUT IN L L R R ON AUDIO OUT 2 8 OFF ON POWER OFF 220V AC INPUT CAUTION 3 RISK OF ELECTRIC SHOCK DO NOT OPEN 110V 110V~220V 50Hz/60Hz VOLTAGE SELECTOR VOLTAGE SELECTOR 110V 220V POWER AC INPUT CAUTION 4 110V~220V 50Hz/60Hz RISK OF ELECTRIC SHOCK DO NOT OPEN Instructions Turning ON/OFF The Speaker can be powered when connected to mains power. 1.Connect the power cable to the top of the unit. 2.Connect the other end of power cable to mains power. 3.Turn on the switch at the mains power point. 4.The unit will automatically power on when connected to mains power. Instructions Using the Wired Microphone You can connect the wired microphone to this unit using the MIC INPUT located on the top of control panel.You will require an adapter if your wired microphone does not use a 1/4” plug. 1.Turn of the unit. 2.Connect your wired microphone to the MIC INPUT located on top of the control panel. 3.Adjust the microphone volume by tuning the MIC VOL/ECHO knobs located on top control panel. NOTES: You can use the wired microphone(not included) and wireless microphone at the same time. Connecting a Guitar You can connect your Guitar to unit using the 1/4” GUITAR INPUT plug. 1.Turn on the unit. 2.Connect your guitar cable to GUITAR INPUT port on top control panel. 3.Adjust the volume by turning the GIUTAR VOL on top control panel. Instructions USB/SD Card Playback You can play music from USB stick or SD Card using the USB/SD slot on the Speaker. 1.Turn on the unit. 2.Insert your USB or SD card into the slot. 3.Once you insert the USB or SD card, the unit will begin automatic play. 4.You can use the PRE/NEXT/PLAY/PAUSE controls to play music. NOTES: The speaker system can play the following audio file formats: MP3,MP4,WMA.The USB/SD Card no more than 32GB.It will need several seconds to play when your USB/SD Card is full of contents. Using the Radio 1.Turn on the unit. 2.Press INPUT just once, it is FM Radio. 3.Press PRE/NEXT to select the radio stations. 4.Ensure that you have an extended antenna located on the rear of the speaker. It will ensure the best possible radio quality and signal strength. 5.At the first use of the radio, press NEXT button twice, it will auto search and store the radio stations. www.pyleaudio.com tel: 718.535.1800 fax: 718.236.2400 1600 - 63rd StreetBrookIyn,N Y,11204