Download User Manual for Motion Controllers - Extension Module

Extension Module for Moog Ruggedized Motion Controller (MSC-R-IO)
1 General Information
About this Manual
1 General Information
1.1 About this Manual
This manual is valid only for the M3000® automation system and M3000®
modules. It contains most important instructions that must be observed in order to operate the M3000® automation system and M3000® modules in a
safe manner.
About this Manual
Every person responsible for machinery planning, mounting, and operation
must read, understand, and follow all points covered in this manual. This applies especially to the safety instructions. Following the safety instructions
helps to avoid accidents, faults, and material damage!
The following items must be observed as fundamental elements of safety
when using the M3000® automation system and M3000® modules:
Using M3000® Safely
(Prerequisites)
• All safety instructions contained in this manual
• All safety instructions contained in the documentation of the M3000®
modules
• All safety instructions contained in the product related hardware and
software documentation required for the relevant application
• All relevant nationally and internationally applicable safety and accident
prevention regulations and standards
1.1.1 Reservation of Changes and Validity
The information contained in this manual is valid at the time of this version's
release. See footer for version number and release date of this manual.
Moog reserves the right to make changes to this manual at any time without
specified reasons.
Reservation of Changes
and Validity for this
Manual
1.1.2 Exclusion of Liability
This manual was prepared with great care and the contents reflect the authors' best knowledge. However, the possibility of error remains and improvements are possible.
Please feel free to submit any comments regarding errors or incomplete information to Moog.
Moog does not offer any guarantee that the contents conform to applicable
legal regulations nor does Moog accept any liability for incorrect or incomplete information and the consequences thereof.
Exclusion of Liability for
this Manual
1.1.3 Completeness
This manual is complete only when used in conjunction with the product related hardware and software documentation required for the relevant application.
Completeness of this
Manual
1.1.4 Place of Storage
This manual and all other associated documentation for hardware and software must always be kept in a location where they will be readily accessible
and close to the M3000® automation system and M3000® modules or the
equipment in which they are installed.
Rev. A, May 2014
Place of Storage
for this Manual
1