Download 9200-G2 User Manual
Transcript
FSP AS Ref.: B12320700PMBRA1 SeaSTAR 9200-G2 User Manual Figure 26 9200-G2 GNSS satellite ground track Figure 27 9200-G2 receiver configuration screen Figure 28 9200-G2 Antenna configuration screen Figure 29 9200-G2 Tracking configuration screen Figure 30 9200-G2 Position configuration screen Figure 31 9200-G2 General configuration screen Figure 32 9200-G2 Application Files configuration screen Figure 33 9200-G2 Receiver Reset screen Figure 34 9200-G2 Default interface language screen Figure 35 9200-G2 I/O Port Summary screen. Figure 36 9200-G2 I/O port configuration screen. Figure 37 9200-G2 Bluetooth information Figure 38 9200-G2 Bluetooth Configuration Figure 39 9200-G2 active Bluetooth connections Figure 40 OmniSTAR summary information Figure 41 OmniSTAR configuration settings Figure 42 OmniSTAR subscription information Figure 43 OmniSTAR status information Figure 44 Network information screen Figure 45 Ethernet configuration settings and overview Figure 46 PPP configuration settings Figure 47 TCP/IP routing information Figure 48 9200-G2 E-Mail Client settings Figure 49 9200-G2 E-Mail Alerts settings Figure 50 9200-G2 HTTP server setting Figure 51 9200-G2 HTTP Proxy Configuration Figure 52 9200-G2 NTP (time-server) configuration Figure 53 9200-G2 VFD Server settings Figure 54 9200-G2 DDNS settings Figure 55 9200-G2 DDNS settings Figure 56 9200-G2 security summary Figure 57 9200-G2 security configuration Figure 58 9200-G2 change password Figure 59 9200-G2 Firmware update screen Figure 60 9200-G2 Firmware upgrade check Figure 61 9200-G2 system log Figure 62 9200-G2 acknowledgements screen Figure 63: Pin layout (7-pin O-Shell Lemo) Figure 64: Pin layout (26-pin D-Sub) Figure 65: 9200-G2 1 PPS Output pulse Figure 66: Bluetooth devices within range Figure 67: Connecting to a remote service. Figure 68: Remote device connected. Figure 69: Setting up a PPP connection. Figure 70: PPP connection up and running. Figure 71: Routing table configuration with active PPP connection. Figure 72: Bluetooth PPP connection active. Figure 73: NTRIP client settings. Figure 74: NTRIP client active. Figure 75: L-band beam status when using NTRIP connections. Figure 76: Network Connections Figure 77: New Connection Wizard Figure 78: Advanced connection setup Figure 79: Direct computer connection Figure 80: Connection mode Figure 81: Connection name Figure 82: Selecting a communication port vii Issue 1.5, January 2010 28 29 30 30 31 31 33 33 35 36 36 37 38 38 39 40 40 41 42 43 43 44 44 45 45 47 47 48 48 50 51 51 52 53 53 54 55 58 59 60 93 94 95 95 96 96 97 97 98 98 99 99 100 100 101 101 102