Download OpenStage 40 User Guide

62
Enhanced phone functions
Holding external calls
If you have programmed a hold key on your phone Æ Page 69, you can put
external calls on hold.
All other stations can then pick up the call on the assigned line.
S
Press the "Hold" key.
The message of the relevant trunk appears (e.g. 801); note the trunk number.
If available, the LED of the assigned trunk key flashes slowly.
Held on line: 801
if nec.
\ or s
Replace the handset or press the key shown.
Depending on the configuration, this may be necessary so other members can
also pick up the call on hold.
Picking up a call on hold
Prerequisite: One or more calls are on hold. The phone is idle.
N
Open the Program/Service menu Æ Page 31.
Calls g
Select and confirm the option shown.
Retrieve line
Select and confirm the option shown.
or
S
j
If the "Retrieve" key Æ Page 69 is available, press it.
Enter the noted trunk number.
or
T
If there is a "Line:" key available for the relevant trunk, the LED flashes slowly.
Press the key shown.