Download User`s Manual

Transcript
Using USB Memory
The content of what has been drawn on the sheet surface of the Copyboard can be saved in USB
memory. Later, the saved image can be read into a personal computer and made into a document of
the proceedings of the meeting, or affixed to a document.
For highly confidential meetings, the included software can be used to make various security settings, for example to enable or disable the function for storing copyboard images onto a USB memory
device.
• What is needed to use the USB memory function
USB memory
: Commercially-available product
Personal computer : The connector is a USB port (type A), and the interface is compatible with USB 1.1 and USB 2.0.
Note
• The copyboard supports USB memory devices in FAT and FAT32 format.
Notice
• For the specification of the USB memory devices compatible with this Copyboard, please go to our website at: http://www.
plus-vision.com
USB Memory Storage Procedure
Preparation:
Connect the AC power adapter to the Copyboard. See Page E-16.
Press the ON/Standby
power.
button and switch on the
Note
• Press the ON/Standby
button more than 3 seconds when connecting
the AC power adapter to the Copyboard unit or after turning off the power.
button to switch on the power. The LED of the
• Press the ON/Standby
display window will light.
Insert the USB memory device into the USB port of
the Copyboard
(The USB port is located on the left side of
the copyboard.)
Notice
• Check the side (polarity) of the USB
memory device before inserting it.
Forcing it in the reverse orientation will
damage the USB port or USB memory
device.
• Be careful not to bump into the USB
memory device with hand or body while
it is mounted. Doing so could damage
the USB memory device or USB port.
E-18
CR-5_Copyboard_Man_E_Vre2_2nd.in18 18
08.6.26 1:24:08 PM