Download User`s Manual
Transcript
Using USB Memory The content of what has been drawn on the sheet surface of the Copyboard can be saved in USB memory. Later, the saved image can be read into a personal computer and made into a document of the proceedings of the meeting, or affixed to a document. For highly confidential meetings, the included software can be used to make various security settings, for example to enable or disable the function for storing copyboard images onto a USB memory device. • What is needed to use the USB memory function USB memory : Commercially-available product Personal computer : The connector is a USB port (type A), and the interface is compatible with USB 1.1 and USB 2.0. Note • The copyboard supports USB memory devices in FAT and FAT32 format. Notice • For the specification of the USB memory devices compatible with this Copyboard, please go to our website at: http://www. plus-vision.com USB Memory Storage Procedure Preparation: Connect the AC power adapter to the Copyboard. See Page E-16. Press the ON/Standby power. button and switch on the Note • Press the ON/Standby button more than 3 seconds when connecting the AC power adapter to the Copyboard unit or after turning off the power. button to switch on the power. The LED of the • Press the ON/Standby display window will light. Insert the USB memory device into the USB port of the Copyboard (The USB port is located on the left side of the copyboard.) Notice • Check the side (polarity) of the USB memory device before inserting it. Forcing it in the reverse orientation will damage the USB port or USB memory device. • Be careful not to bump into the USB memory device with hand or body while it is mounted. Doing so could damage the USB memory device or USB port. E-18 CR-5_Copyboard_Man_E_Vre2_2nd.in18 18 08.6.26 1:24:08 PM