Download IC-E7 Manual

BATTERY CHARGING
2
■ Battery charging
D Charging connections
Transceiver
D Charging description
to [12~16V DC INPUT] jack
SCAN
2
qPlug the AC adapter into an AC outlet; or the optional CP21LR into a cigarette lighter socket.
wInsert the adapter plug into [12~16V DC INPUT] of the BC164 BATTERY CHARGER.
eInstall the BP-243 BATTERY PACK (See left page) in the
transceiver
rBe sure to turn OFF the transceiver, then charge the battery with transceiver.
• Takes approximately 3 hours to fully charge with the supplied BP243 battery pack.
S.MW
SET
Charging
indicator
to AC outlet
AC adapter
to cigarette
lighter socket
BC-164
Optional CP-21LR
Cigarette lighter cable
with noise filter
Charging indicator of BC -164
Orange (lights) : During charging.
Green (lights) : When the battery pack is charged completely.
Red (blinking) : The charger may be outside of the specified
temperature range: +5˚C to +35˚C (+41˚F to
+95˚F). Restore the specified temperature
range and reinsert the transceiver or contact
your dealer.
CAUTION: BE SURE to disconnect the CP-21LR from the
cigarette lighter socket when charging is finished, because,
a slight current still follows in the CP-21LR and the vehicle’s battery will become will be drained.
• Charging periods: Approx. 3 hours
8