Download TRACE Plug-in Users Manual

Transcript
Vessels
Figure 6.56. Jet Pump Properties
6.15. Vessels
The Vessel component is the 3D hydraulic component for TRACE. Vessels are either rectangular
or cylindrical components broken down into axial levels. Each axial level has a planar array
of cells organized first by the Y or Azimuthal axis, and then the X or Radial axis. Unlike 1D
hydraulic components, Vessel cells are referred to by a compound number combining the axial
level, and the planar cell index. Figure 6.57, “Vessel Completion Dialog” below displays the
completion dialog for a vessel.
Figure 6.57. Vessel Completion Dialog
6.15.1. Vessel Geometry
Vessels are 3D components that may be defined in cylindrical or Cartesian coordinates. The
decision of coordinate system must be made from the completion dialog, and cannot be changed
after the dialog is exited. As with 1D components, the nodalization is initialized during creation
and can only be modified through the renodalization wizard described in Section 16.2, “3D
Hydraulic”. The geometry of the existing nodalization may be modified through the Geometry
and Connections dialog shown below in Figure 6.58, “Vessel Geometry”.
45
TRACE Plug-in User's Manual