Download TRACE Plug-in Users Manual

Mapping Configuration
Figure 21.5. Vessel Mapping Editor
The Hydraulic mapping also provides a series of editors for defining map properties. Selecting the
"Hydraulic Components" field will enable the 2D hydraulic mapping editor. The hydraulic editor
is similar to the Vessel editor as it allows specific node assignment of components. The hydraulic
editor includes Axial Levels and a list of available hydraulic components to set on the core planar
nodes. Selecting on a hydraulic component in the provided list will cause the 2D mapping display
to select each of the nodes which are assigned to the selected hydraulic component. Selecting on
a 2D mapping node selects the hydraulic components in the list which are mapped to the selected
nodes. The assignment of the hydraulic components to the 2D mapping view is similar to the
vessel mapping dialog. Selecting the Assign button will set the cursor to a crosshair which can
be used to select the hydraulic component which is to mapped to the selected nodes.
Figure 21.6. Hydraulic Mapping Editor
Both the Hydraulic Mapping editor and Vessel Mapping editor provide undo/redo capabililty. An
undo or redo operation can be made by clicking on the provided buttons or pressing the control+z
(undo)/control+y(redo) key combinations. The undo/redo state is tied to the dialog and has no
affect on the system undo manager.
TRACE Plug-in User's Manual
122