Download INSTRUCTION MANUAL

2. LiPo Battery Pack
For switching on please press and hold the button for more than three second. The PWR LED and
LIPO LED will turn on. For switching off please press and hold the button until all LEDs turn off. The
PWR LED also shows you the remaining battery capacity when switched on.
SWITCH ON
SWITCH OFF
Press and hold the button
for more than three second.
Press and hold the button until all LEDs turn off.
REMAINING BATTERY CAPACITY
Green
Orange
Red
Red Blinking
80-100%
60-79%
20-59%
<20%
SPECIFICATIONS
Low Voltage Protection: 6.2V(LiPo)
Operating temperature: 0-50℃
Weight: ≤7g
2. LiPo
34.5mm
28.5
22.5
22.5mm
8.5
16
21.93
8.5
16
3- 3.2
15.93
Input Voltage: 4-12V
Max. Current: 10 Amp
Battery Mode: 1. NiHM / NiCad
With Transponder Mount
Without Transponder Mount
WARRANTY AND SERVICE
We guarantee this product to be free of manufacturing and assembly defects for a period of one year
from the time of purchase. The warranty only applies to material or operational defects, which are
present at the time of purchase. During that period, we will repair or replace free of service charge for
products deemed defective due to those causes.
You will be required to produce proof of purchase (invoice or receipt). This warranty is not valid for any
damage or subsequent damage arising as a result of misuse, modification or as a result of failure to
observe the procedures outlined in this manual.
Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com
RoHS
7504-0318-01
2/ 2