Download Surface Roughness Tester

6.4.1
Connecting the SJ-201P and DP-1VR
Connect the SJ-201P and DP-1VR using the SPC cable according to the following procedure.
1. Remove the two screws securing the rear cover of the SJ-201P, then remove the rear cover.
2. Use the dedicated connection cable to link the SJ-201P and DP-1VR.
SJ-201P
Data processor
DP-1VR
SPC
connector
-NG
GO
+NG
POWER
PRINTER
CL
TOL.
LIMIT
STAT
CE
DATA
SPC cable
INPUT
FEED
OUTPUT
POWER
Connect to the data input connector on the INPUT side.
3. Turn on the DP-1-VR.
Data processor
DP-1VR
POWER
-NG
+NG
PRINTER
CL
TOL.
LIMIT
STAT
CE
FEED
6 - 24
GO
POWER
Turn to “ON” position.
DATA
No. 99MBB079A