Download User Manual

IGS-P9812GP Series User Manual
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Indicates the community access string to permit access to SNMPv3
Community
agent. The allowed string length is 1 to 32, and only ASCII characters
from 33 to 126 are allowed.
Source IP
Indicates the SNMP source address
Source Mask
Indicates the SNMP source address mask
5.5.3 SNMP User Configurations
Each SNMP user has a specified username, a group to which the user belongs,
authentication password, authentication protocol, privacy protocol, and privacy password.
When you create a user, you must associate it with an SNMP group. The user then
inherits the security model of the group. This page allows you to configure the SNMPv3 user
table. The entry index keys are Engine ID and User Name.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
An octet string identifying the engine ID that this entry should belong
to. The string must contain an even number between 10 and 64
hexadecimal digits, but all-zeros and all-'F's are not allowed. The
Engine ID
SNMPv3 architecture uses User-based Security Model (USM) for
message security and View-based Access Control Model (VACM) for
access control. For the USM entry, the usmUserEngineID and
usmUserName
are
the
entry
keys.
In
a
simple
agent,
usmUserEngineID is always that agent's own snmpEngineID value.
ORing Industrial Networking Corp
71