Download WW-Compact Panel

6. Product Description
6.3. Top View
1
2
3
5
4
4
4
4
6
Fig. 22: Top side of the system (shown as M@CII 104)
1
2
3
3
4
4
5
6
Fig. 23: Top side of the system (shown as M@CII 70)
Legend for Fig. 22 and Fig. 23:
1
CompactFlash™ card (if ordered)
2
CompactFlash™ slot with eject button
3
Air exhaust openings
4
Mounting slots with installed mounting clamp and Allen
Screw
5
Screws that secure the cover on the top side
6
Front panel with seal on the rear side
The M@CII 70 system doesn’t have mounting slots at the interface and top side.
When powering on the M@CII 70/104/121/150 system, make sure that the air intake and exhaust
openings are not obstructed.
6.3.1. CompactFlash™ Slot
The system is equipped with a CompactFlash™ slot. The CF-slot is located on the rear top side and accepts only
CF cards type I.
Before installing or removing the Compact Flash™ card, the M@CII 70/104/121/150 system must be
powered down and disconnected from the power source.
The M@CII 70/104/121/150 system is not equipped with a power button.
Only the M@CII 104/121/150 systems are equipped with a cover, in order to cover the CF.slot, if no
CF card is installed. If a CF-card is installed, the cover can be mounted to the “Safe-keeping” location
(refer to Fig. 25, pos. 7 and Fig. 28, pos. 8).
24
M@CII 70/104/121/150 - User’s Manual (V1.00)