Download Cobalt Qube 2 User Manual

Setting up the Qube 2
Phase 2: Setting up with the Web browser
The remainder of the setup process is performed through a Web browser
on any computer on your network. Use one of the standard browsers
available (for example, Netscape Navigator or Microsoft Internet
Explorer, versions 3.0 or later) to do this. Once the setup process is
complete, the Qube 2 can be managed from any computer on the
network that has a browser. To use the browser to set up the Qube 2,
follow these steps:
1.
Launch a standard Web browser on any computer connected to the
network.
2.
Enter the IP address of the Qube 2 (displayed on the LCD screen on
the back of the Qube 2) in the URL field of your browser, for
example:
3.
Then press Return (or Enter) on your keyboard.
If you configured the Qube 2 network settings successfully, the Cobalt
Welcome screen appears; see Figure 7.
Click the Start button to being using the Setup Wizard. A separate
browser window opens with the first screen of the Setup Wizard.
Figure 7
Qube 2 Welcome screen
19