Download USER MANUAL

Digital Projection M-Vision
930 Series
SIGNAL INPUTS
Connection Guide
Analog inputs
1
Component 1
2
Component 2
Notes
1
The Component inputs use colorspaces assigned
from the Color Space setting in the Color menu.
Set Color Space to Auto and the projector will
automatically detect and assign the colorspace as
required. Otherwise, assign the colorspace as follows:
• When using RGsB, set Color Space to RGB PC or
RGB Video.
•
•
3
When using YPbPr, set Color Space to YPbPr.
When using YCbCr, set Color Space to YCbCr.
VGA
This input receives analog signals from a computer.
When using this input, it is best to use a fully wired VGA
cable to connect the source to the projector. This will
allow the source to determine the projector’s capabilities
via DDC and show an optimized image. Such cables
can be identified as they have a blue connector shell.
Rev B July 2014
3
Analog connections
1
Component 1
2
Component 2
3
VGA
2
For a complete listing of all
supported signal input modes, see
Appendix C: Supported Signal
Input Modes in the Reference
Guide.
For a complete listing of pin
configurations for all signal and
control connectors, see Appendix
E: Wiring Details in the Reference
Guide.
24