Download Dilog DC

9 INSTALLATION
This menu contains following
items:
• Automatic search cable
• Manual search cable
9.1 Automatic Search Cable & Manual Search Cable
You have two options for the scan of cable channels. If you already know the
parameters of the channels you wish to find, use the manual Channel Search
and enter the required parameters accordingly.
Otherwise use the Automatic Channel Search in which all Frequencies are
scanned.
In Manual Mode the search begins with
the Start frequency.
Enter the Symbolrate and Constellation.
Depending on the cable Network choose
“Network Scan” on for a fast search for
all channels.
To start the channel scan please enter
the following parameters and press the
RED key.
• Start frequency: Enter the Transponder
frequency by pressing OK and using the numeric keys to enter the according
Value.
• Constellation: This is an extended Parameter which specifies how the digital
TV-Signal is transmitted. Your TV-Network Operator will inform you about the
correct value.
• Symbolrate: Enter the Symbolrate using the OK- and the numeric keys.
• Network Search: Choose „On“, if your Search is to include all Transponders,
that are connected to a certain Network.
Use the NAVIGATION Keys LEFT and RIGHT to toggle between „On“ and „Off“.
21