Download User manual for IOS phone client

IOS APP User Manual
1, Plugin camera and cable, camera test itself 60s.
2 ,App Installation
(Notes : Ensure phone’s network connection is success when using the app)
Download path
Method 1:Find the disk which comes with product, visit the link on the disk.
Method 2: Search “YIPC” on App Store ,find the app and install.
3. Main module Home Page
Main module--<Edit>< Add New Camera>< Camera List><Camera Event>.
4.Add camera：
Method1: Click “Add New Camera ” on App main interface to access “Add
Camera”interface.Click “Search”, App will find the online cameras which in same LAN
with the phone.Select the camera ,input password and click “Done” to finish.
Method 2: Click the “Scan QR Code” on “Add Camera” interface to scan
the QR code which on the UID lable,input password and click “Done” to
Finish.
Method 3:Input the UID on “Cam ID” text box and default password
(Note：The default password of camera’s user name is 12345)
5 Monitoring Interface.
1), Edit
Click “Edit”,pop up new window,find right camera which you want to delete,swipe right,you will
see “delete”,click,then Done.
2), Monitor camera:
Open software,find camera list,click right camera which you want to view,pop up new
window,swipe right and left to control camera.
3), Key functions:
A: Setting Menu
a. Mode--Full HD,Quality,Speed.
b.
--Color Balance
c.
--Luminance
d.
--Default video param
e.
--Open IR
f.
--Close IR
g.
--Open outer connecting alarm
h.
--Close outer connecting alarm
i.
--Light frequency
B. Cruising up and down.
C. Cruising left and right.
D. Flip left and right.
E. Flip up and down
F. Preset
G. Close Screen
H. Photo
I. Video
J. Audio
K. 720P/VGA/QVGA
M. Full screen/3/4 screen
Tips:Turn down the resolution of video to make the video streaming smoothly in bad
network condition.
4), Four-cameras viewing mode
Click logo of YIPC ,pop up window of 4 cameras.
5), Local records
Open home page, you can check those records from
(Photo default format is JPEG,Video is AVI)
“Event”“Photo”“Video”.
6), Camera setting?
Open Home page,find right camera,you will see
,click this,you will enter setting page.
A, WIFI setting
Click “WIFI”, camera will automatic search near network, click right one,put right password,click
“ Join”,camera will reset,wait 60s, then you can pull out the cable, use WIFI.
B, User setting
You can set “Administrator” “Operator”“Visitor”
C, Time setting
D, FTP setting
F, Alarm setting
Tip: Alarm records and Alarm pictures.
You can find alarm record and alarm pictures on main page.
G, Email setting
H, Record setting
I, Restart setting