Download "user manual"

Quick Installtion Guide
Contents
Preface
Thanks very much for choosing our IPCamera. In order to make it more convenient for you
to use proficiently, we provide you with a user manual. Please read it carefully before
using and properly keep it for reference.
Statements
We have made every effort to provide the most current information about our product.
We do not grant any guarantees as to the contents of the present instruction manual and
disclaim any implied guarantees concerning market value or suitability for specific purposes.
The information contained here is an instruction intended to enable the correct usage and
maintenance of the receiver.
We reserve the right to introduce amendments, changes or translations of the user manual
without prior notification thereof. For this reason, we recommend you regularly to visit our
website in order to obtain the latest information.
Chapter 1 System Introduction
1. 1 Key Features
1. 2 Environment for System
1. 3 Package Contents
1.4 Interface
Chapter 2 Device Connection
2.1 Ethernet Cable Connection
2.2 Power adapter Connection
Chapter 3 Apple Device setting
3.1 Download and install Apple APP
3.2 APP Features introduction
3.3 Add Camera
3.4 Delete Camera
3.5 Camera Setting
3.5.1 WIFI Setting
3.5.2 User Setting
3.5.3 Time Setting
3.5.4 FTPP Setting
3.5.5 Alarm Setting
3.5.6 Email Setting
3.5.7 Record Setting
3.5.8 Reboot
3.6 Event
3.7 Photo
3.8 Video
3.9 About
Chapter 4 Android Device setting
4.1 Download and install Android APP
4.2 APP Features introduction
4.3 Add Camera
4.4 Delete Camera
4.5 Camera Setting
4.5.1 WIFI Setting
4.5.2 User Setting
4.5.3 Time Setting
4.5.4 FTP Setting
4.5.5 Alarm Setting
4.5.6 Email Setting
4.5.7 Record Setting
4.5.8 Reboot
4.6 Event
4.7 Photo
4.8 Video
4.9 About
Chapter 5 PC software
5.1 Download and install Software
5.2 Software home page introduction
5.3 Add Camera
5.4 Delete Camera
5.5 Camera Settings
5.5.1 WIFI Setting
5.5.2 User Setting
5.5.3 Time Setting
5.5.4 FTP Setting
5.5.5 Alarm Setting
5.5.6 Email Setting
5.5.7 Record Setting
5.5.8 PTZ Setting
5.5.9 DDNS Setting
Chapter 6 Broswer View (IE Example)
6.1 Download and install IE Plug-in
6.2 Download and run IP Camera Finder
6.3 Internet Explorer page introduction
6.4 Camera Settings
6.5 Turn on / off Flashing blue light
How to reset to factory settings
01
01
01
01
02
03
03
03
04
04
04
07
08
08
13
13
14
14
15
15
15
18
19
19
24
24
25
25
26
26
27
28
29
30
35
35
35
36
37
38
39
Chapter 1 System Introduction
1. 4 Interface
1. 1 Key Features
Video support VGA, QVGA, MJPEG compression technology.
Supports iphone and android mobile monitoring clients.
Built-in Wi-Fi module, support for wireless standards IEEE 802.11b/n/g.
Integrated IRCUT dual filter, bright colors do not color cast.
Supports two-way voice intercom and one-way voice broadcast.
Supports video recording to Micro SD card.
Supports rotation pan angle rotation: 350°, tilt angle rotation: 90°.
Supports standard RJ45 cable network connection.
Photoresistance
IR Light
Speaker
Microphone
Wifi Antenna
DC In
Audio Jack
I/O Alarm Interface
Cable Connection
Micro SD Card Slot
1. 2 Environment for System
Operation : Temperature limitation: 0--40℃; Humidity limitation: S20--80%.
Storage : Temperature limitation: -20--50℃; Humidity limitation: S10--90%.
Attach Mounting Bracket
1. 3 Package Contents
Reset button
01
Accessories
Quantity
NC300 IP Camera
1
Mounting Bracket
1
Mounting Screws
1
Ethernet Cable
1
Power Adpater
1
User Manual
1
Warranty Card
1
Data CD
1
LENS
Note: NC300 can be reset to factory settings by pressing the reset button for 10 seconds.
The reset button can be found at the bottom of the camera.
Please make sure the power is connected while resetting.
02
Chapter 2 Device Connection
Chapter 3 Apple Device setting
2. 1 Ethernet Cable Connection
Plug cable to cable connection of NC300 / Router.
2. 2 Power Adapter Connection
Plug Power adapter to “DC In Jack” of NC300.
3. 1 Download and install Apple APP
Enter APP Store, search, download and install “YIPC”.
Router
Power Adapter
LAN Interface
②
And make sure that the Power indicator light of the router is on and the Network Indicator light of
Nc300 is blinking .
3. 2 APP Features introduction
Click here to run APP
03
04
Edit the camera which is on the
camera list,you can delete the
camera from the camera list or
re-enter the password or user
name when it says Invalid user
or password.
Click here to initialize the
camera settings.
4 camera viewing mode.
Click here to add new camera.
Click here to enter Real-time
video monitoring screen.
Click to access camera settings
interface.
1.Camera:Click this icon to
return to main menu list.
Click this area to enter Real-time video monitoring screen.
1
2
1.1
1.2
1.3
1.4
1.5
1.6
3
4
6
5
6.1
7
6.2
1.7
2.Event:Displays alarm logs.
3.Photo:To check recorded
photos.
1
2
3
4
5
4.Video:To check the video
recordings.
.
5.Information about the
applications.
Click this icon to enter 4 camera viewing mode.
8
9
10
11
1.This button includes 7 icon buttons:
1.1 Video mode/resolution setting: High Quality / normal / Speed
1.2 White balance
1.3 Brightness
1.4 .Reset video settings to factory default
1.5 IR Light control: Open Led Light / Close Led Light / Auto Led Light
1.6 GPIO Alarm: Open GPIO Alarm / Close GPIO Alarm
1.7 Frequency: 50Hz / 60Hz
2.Panning Horizontally
Click here to get full screen display
3.Tilting Vertically
4.Horizontal Mirror image
5.Vertical Mirror image
6.Preset position settings
6.1 Recall position
6.2 Set position
7.Close monitoring interface
8.Capture Photo
9.Video Recording
10.Enable/Disable Audio
11.Screen switching
Click the camera list to view real-time video monitoring
You can add a maximum of 4 cameras to the viewing mode.
05
06
3.3 Add Camera
There are 3 methods to add cameras:
Method 1 - Input the UID username and password directly.
Method 2 - Scan QR Code.
Method 3 - Search camera on the same network.
Click here to add new camera
3.4 Delete Camera
Click here to edit camera settings
Method 1: Enter the UID
Username and password
directly.
Swipe the arrow to the left to
expose the delete button.
Then click to delete the camera.
Method 2: Scan QR code
to add Camera.
(Figure 3.31)
Method 3:Search camera
on the same network.
(Figure 3.32)
3.5 Camera Setting
Scan QR code to add Camera.
Select the camera that you
want.Then enter the usename
and password.
Click to access camera settings.
Note:The camera and your
iphone have to be on the same
network.
07
Figure 3.31
Figure 3.32
08
3.5.1 Wifi Setting
Click “Done”to store and enable WIFI settings,
camera will reboot automatically,you can unplug
the LAN cable and use WIFI.
3.5.3 Time Setting
Displays the actual
time of the camera.
Click here to scan the “Wireless
Access Points”around you.
Select the TimeZone.
Click to access WIFI settings.
Enter Wifi password.Then click
Join button.
Click to access Time settings.
NTP Time values settings,
camera will get the time
value from the server
once settings are done.
Sync the camera's time
to your phone.
Wireless Acces Point
displayed,select your
target network,input
it's password.
(if PW is required)
3.5.2 User Setting
Click “Done” to store and enable all settings.
3.5.4 FTP Setting
Input FTP Server address.
Input FTP port.
Click to access User settings.
Input FTP user name.
Input FTP password.
Click to access User settings.
Setting upload Interval.
You can change all user name
and passwords except for
the administrator
09
10
3.6 Event
3.8 Video
In “Video” Mode,you can choose “Local” to check the videos that were recorded on
your iphone or choose “Remote” to check the videos that were recorded on the
camera's SD Card.
Displays the alarm logs.
3.9 About
3.7 Photo
Check recorded videos.
13
14
3.5.7 Record Setting
3.5.5 Alarm Setting
Click “Done”to store and
enable all settings.
Click “Done”to store and
enable all settings.
Enable/Disable motion
detection setting.
Enable:SD Card recordings will
be overwritten when SD Card's
capacity is full.
(SD card not included)
The sensibility setting.
The bigger number, the
higher the sensibility.
Click to access Alarm settings.
When the alarm is enable.
you have the option of 16
presets in total.
Start time and end time can be
set on your camera.This mode
will automatically record on
those set times.
Click to access Recording settings.
It's better to format the SD Card
before recording.
Enable:Camera will send
email notification when
alarm is actived.
Enable:Camera will start
to record automatically.
Enable/Disable alarm
sound.
3.5.6 Email Setting
3.5.8 Reboot
Click “Done”to store and enable
all settings at the end.
Input the email that you want to
send alarm notifications to.
Input the SMTP server of
your sender’s email.or click
the icon to choose a server.
Input the SMTP port of your
sender email.
Select your email protocol.
Enable
Click to access Email settings.
Input the sender’s email again.
Input the password of your
sender’s email.
Click to Reset Camera.
You can set up to 4 email
receivers in total.
11
12
Chapter 4 Android Device setting
4. 1 Download and install Android APP
Enter the google play, search download and install “YIPC”.
Edit the camera which is on the
camera list,you can delete the
camera from the camera list or
re-enter the password or user
name when it says Invalid user
or password.
4 camera viewing mode.
Click here to add new camera.
Click here to initialize the camera.
Click here to enter Real-time
video monitoring screen.
Click to access camera settings
interface.
1.Camera:Click this icon to
return to main menu list.
4.Video:To check the video
recordings.
5.Information about the
applications.
2.Event:Displays alarm logs.
1
2
3
4
5
3.Photo:To check the recorded
photos.
4. 2 APP Features introduction
Click the icon of <4 cameras viewing mode> enter 4 cameras viewing mode.
Click here to get full screen display
Click here to run APP
Click the camera list to view real-time video monitoring.
You can add maximum of 4 cameras to the viewing mode.
15
16
4.3 Add Camera
There are 3 methods to add cameras:
Method 1 - Input the UID username and password directly.
Method 2 - Scan QR Code.
Method 3 - Search camera on the same network.
Click this area to enter Real-time video monitoring screen.
1
2
1.1
1.2
1.3
1.4
1.5
1.6
4
3
5
6
Click here to add new camera
Method 1: Enter the UID
Username and password
directly.
7
Method 2: Scan QR code
to add Camera.
(Figure 3.31)
8
9
10
11
12
Method 3: Search camera
on the same network.
(Figure 3.32)
1.This button includes 6 icon buttons:
1.1 Horizontal Mirror image
1.2 Vertical Mirror image
1.3 Color Saturation
1.4 Open GPIO Alarm
1.5 Contrast
1.6 Close GPIO Alarm
2.Panning Horizontally
3.Tilting Vertically
4.Preset positions setting: Recall position / Set position
Scan QR code to add Camera.
5.Enable/Disable full screen display
6.Close monitoring interface
7.Arrows:Click :Camera view moves as same as the arrows direction
8.Enable/Disable Audio
9.Capture Photo
10.Video Recording
11.Videomode/resolution setting: High Quality / normal / Speed
Select the camera that you
want.then enter the usename
and password.
12.Reset video settings to factory default
12.IR Light control:Open Led Light / Close Led Light / Auto Led Light
Note:The camera and your
iphone have to be on the same
network.
17
Figure 3.31
Figure 3.32
18
4.4 Delete Camera
4.6.1 Wifi Setting
Click “Done”to store and enable WIFI settings,
camera will reboot automatically,you can unplug
the LAN cable and use WIFI.
Click here to enter camera settings
Click to access WIFI settings.
Click here to scan the “Wireless
Access Points”around you.
Enter Wifi password.then click
Done button.
Select camera that you want
to delete.then click Delete button.
Wireless Acces Point
displayed,select your
target network,input
it's password.
(if PW is required)
4.5 Camera Setting
4.6.2 User Setting
Click “Done” to store and enable all settings.
Click to access User settings.
Click to access camera settings.
You can change all user name
and passwords except for
the administrator.
19
20
4.5.3 Time Setting
4.5.5 Alarm Setting
Click “Done”to store and
enable all settings.
Displays the actual
time of the camera.
Enable/Disable motion
detection setting.
Select the TimeZone.
Click to access Time settings.
NTP Time values setting,
camera will get the time
value from the server
once settings are done.
The sensibility setting.
the bigger number, the
higher the sensibility.
Click to access Alarm settings.
When the alarm is enable.
you have the option of 16
presets in total.
Sync the camera's time
to your phone.
Enable:Camera will send
email notification when
alarm is activated.
Enable:Camera will start
to record automatically.
Enable/Disable alarm
sound.
4.5.4 FTP Setting
4.5.6 Email Setting
Click “Done”to store and enable
all settings at the end.
Input the email that you want to
send alarm notification.
Input FTP Server adress.
Input FTP port.
Input the SMTP server of
your sender’s email.or click
the icon to choose a server.
Input FTP user name.
Input the SMTP port of your
sender email
Input FTP password.
Click to access FTP settings.
Setting upload Interval.
Enable
Click to access Email settings.
Select your email protocol.
Input the sender’s email again.
Input the password of your
sender’s email.
You can set up to 4 email
receivers in total.
21
22
4.6 Event
4.5.7 Record Setting
Click “Done”to store and
enable all settings.
Enable:SD Card recording will
be overwritten when SD Cards
capacity is full.
(SD card not included)
Start time and end can be set on
your camera.This mode will
automatically record on those
set time.
It's better to format the SD Card
before recording.
Click to access Record settings.
Display the alarm logs.
4.5.8 Reboot
4.7 Photo
Click to Reset Camera.
Check the record videos.
23
24
4.8 Video
In “Video” Interface,you can choose “Local” to check the videos that were recorded on
your phone or choose “Remote” to check the videos that were recorded on the
camera's SD Card.
Chapter 5 PC software
5. 1 Download and install Software
Enter the website: http://www.ipcsw.com/n3.html, download and install “PC Software”.
4.9 About
25
26
5. 2 Software home page introduction
24
19
1.2
1.1
1.8
10
11
12
13
14
1.3
1.7
1.6
3
4
5
6
7
8
9
16
17
27
1.Rotation control buttons:
Press on the number corresponding to the direction in which you want the camera to turn to.
2.Tilt Horizontally
3.Pan Vertically
4.OSD
5.IR Light control:Open Led Light / Close Led Light / Auto Led Light
6.Horizontal Mirror image
7.Vertical Mirror image
8.Open GPIO A larm
9.Close GPIO A larm
10.Frequency: 50Hz / 60Hz
11.Video resolution setting: 640*480 / 320*480
12.FrameRate:15 / 20 / 25
13.Set network bandwidth
14.Brightness
15.Get Set parameters
16.Reset video settings to factory default
17.Add camera
18.Set camera parameters
19.Enalbe / Disable Speaker
20.Enable / Disable Microphone
21.Video Recording
22.Capture Photo
23.Close monitoring interface
24.Minimize window
25.Maximize window
26.Close window
27.Camera lists
27
5.3 Add Camera
There are 2 methods to add a camera:
Method 1 - Search camera (camera and computer should be on the same network).
18 20 22
1.4
1.5
2
15
21 23
25
26
Method 1:Search camera in the same network.
Method 2 - Input the UID username and password directly.
Method 2: Enter the UID Username and passworddirectly.
28
5.5.1 Wifi Setting
5.4 Delete Camera
Click here to scan the “Wireless Access Points”around you.
Enter Wifi password.then click Set button.
Select camera that you want to delete.Then click the Delete button.
If you want to delete all the cameras.click Delete All.
Wireless Acces Point displayed,
select your target network,input
it's password.(if PW is required)
Click “Set”to store and enable WIFI settings,
camera will restart automatically,you can unplug
the LAN cable to use the WIFI.
5.5 Camera Settings
3.5.2 User Setting
Click to access camera settings.
You can change the user name and password in here.
Click “Set” to store and enable all settings.
29
30
5.5.3 Time Setting
5.5.5 Alarm Setting
Enable/Disable motion detection
1
2
3
Sensibility set,the bigger number,the higher sensibility.
When the alarm is enable.you have the option of 16 presets in total.
4
Enable:Camera will send email notification when alarm is actived.
1. Displays the recent time of the camera.
2. Select the TimeZone.
3. NTP Time values settings,camera will get the time
value from the server once settings done.
4. Sync the camera's time to your phone.
Click “Set” to store and enable all settings.
Click “Set”to store and enable all settings at the end.
3.5.6 Email Setting
5.5.4 FTP Setting
Input the SMTP server of your sender’s email.
or click the icon to choose server.
Input the email that you want to
send alarm notifications to.
Input FTP Server adress.
Input FTP port.
Input FTP user name.
Input FTP password.
Setting upload Interval.
Enable
Input the SMTP port of your
sender email
Select your email protocol.
Input the sender’s email again.
Input the password of your
sender’s email.
You can set up to 4 email
receivers in total.
Click “Set”to store and enable all settings at the end.
Click “Set” to store and enable all settings.
31
32
5.5.9 DDNS Setting
5.5.7 Record Setting
1) Register DDNS account.you can register from the follow website
www.3322.org / www.dyndns.org / www.9299.org
2) Setting DDNS
It's better to format the SD Card before recording.
Enable:SD Card recordings will overwrite record when SD Card's capacity is full.
Start time and end can be set on your camera.
This mode will automatically record on those
set time.
3) Setting your router
5.5.8 PTZ Setting
Setting the rotation speed.
4) View using DDNS
33
34
Chapter 6 Internet Explorer View
6. 3 Internet Explorer page introduction
6. 1 Download and install IE Plug-in
Enter the website: http://www.ipcsw.com/n3.html, download and install “IE Plug-in”.
1
6. 2 Download and run IP Camera Finder
Enter the website: http://www.ipcsw.com/n3.html, download and run “IP Camera Finder”.
10
11
12
13
14
15
2
3
4
5
6
7
8
9
16
17
18
19
Double click the camera that you select
to enter Internet Explorer View mode.
Click Find to scan the NC300 on the same network.
35
20
21
22
23
1.Rotation control buttons:
Press on the number corresponding to the direction in which you want the camera to turn to.
2.Tilt Horizontally
3.Pan Vertically
4.OSD
5.IR Light control:Open Led Light / Close Led Light / Auto Led Light
6.Horizontal Mirror image
7.Vertical Mirror image
8.Open GPIO A larm
9.Close GPIO A larm
10.Frequency: 50Hz / 60Hz
11.Video resolution setting: 640*480 / 320*480
12.FrameRate:15 / 20 / 25
13.PTZ Speed
14.Brightness
15.Set network bandwidth
16.Reset video settings to factory default
17.Recall position
18.Set position
19.Enalbe / Disable Speaker
20.Enable / Disable Microphone
21.Video Recording
22.Capture Photo
23.Camera Settings
36
6. 4 Camera Settings
6.5 Turn on / off Flashing blue light
You can turn ON / OFF the flash bule light
open:turn on flashing blue light
close:turn off flashing blue light.
The following Settings please refer to Chapter 5
WIFI Setting
User Setting
Time Setting
FTP Setting
Alarm Setting
Email Setting
Record Setting
Click here to enter flashing blue light setting.
NOTE:Flashing blue light belongs power control parts.Only in this interface it is can be
setted
37
38
How to reset to factory settings
Please make sure the power is connected while resetting.
Rest button
Press 10 seconds to reset
39