Download User Manual - Direct Distribution Company

Main Menu
Status
Control
Configuration
Test And Diagnostics
Log
About
Status Menu
UPS
Battery
Accessory***
Control Menu**
UPS
Bypass
Outlet Group 1*
Outlet Group 2*
Outlet Group 3*
Clear Alarms
UPS**
Efficiency
Output Power, VA, Watts, %
Output Voltage, Current, Frequency
Energy Usage
Battery State Of Charge, Runtime
Input Voltage, Frequency
Bypass Voltage, Frequency
Self Test
Runtime Test
Config Menu
UPS
Battery
Outlets*
Communication
Display
UPS**
Turn On / Off / Reboot
UPS Bypass**
Go into Bypass
Go out of Bypass
Outlet Group
Turn On / Off / Reboot*
Battery
Battery Status Information
Accessory
Network Management Interface Information*
Test and Diagnostics Menu
Self Test
Runtime Test
Alarm Test
UPS
Green mode Enable / Disable
Output Voltage / Frequency Settings
Bypass Settings
Battery Settings
Self Test Schedule
Default Setting
Reset Energy Meter*
Battery
Install Date
Replace Notification
Replace Battery Alarm
Outlets
Main Outlet
Outlet Group 1
Outlet Group 2
Outlet Group 3
Communication
Network IP Address / Boot Mode
MODBUS Address*
Menus are subject to change depending on the installed firmware version
* Available on the Advanced Menu Screens
** Options displayed will vary based on UPS state.
***Options displayed will vary based on connected accessories.
Display
Language
Beeper Volume
LCD Backlight
Menu type - Standard / Advanced
Log
Event Log
About Menu
UPS
Battery
Accessory
UPS
Part Number
Serial Number
Manufacture Date
Firmware Version
Date and Time
Battery
Part Number
Install And Replace Date
Firmware Version*
Accessory
MAC Address
IP Address
Firmware Version