Download Etekcity® T3 Bluetooth Speaker
Transcript
Etekcity® T3 Bluetooth Speaker User’s manual Introduction Thank you for purchasing the Etekcity T3 Bluetooth speaker. This speaker supports Bluetooth 2.1 + EDR, providing compatibility with a greater range of mobile phones, smartphones, tablets, laptops, and many other Bluetooth-enabled devices. Combining modern electronic technology and ultimate portability, the Etekcity T3 speaker offers high-end audio for an enjoyable listening experience. Operating instructions Charging To charge, connect the included USB cable to a computer’s USB port or 5V USB charger. When charging, the indicator light will glow red. When the indicator light turns off, charging is finished. Average charging time to full capacity is 3 hours when off and up to 5 hours during use. (Please charge speaker before first use.) When the battery level is drained to a certain point, the indicator light will flash green, and an audio tone will play. You should recharge the speaker when this occurs to prevent the speaker from shutting off when the battery is completely drained. Turn the speaker off when not in use. Turning on/off To turn on, move the power switch to the “ON” position. The indicator light will illuminate. To turn the speaker off, move the switch to the “OFF” position. Changing mode If a 3.5mm audio cable is plugged in, the speaker will operate in AUX mode. In order to switch to Bluetooth mode, unplug the 3.5mm audio cable. Using Bluetooth mode With the speaker turned on in Bluetooth mode, activate Bluetooth on your mobile phone or other device. The indicator light on the speaker will be flashing green and blue. Scan for Bluetooth devices, and select “T3”. If a passcode is required, enter “0000”. After pairing has completed, you will be able to play music, other audio, and hear calls from the speaker. The indicator light will slowly flash blue. You can use the VOL-, VOL+, and play/pause buttons to control the volume, play and pause audio, and answer or refuse calls. The speaker also has a built-in microphone. The speaker will automatically connect with the last paired device if turned off and back on, provided it is within range. After a period of inactivity, the speaker will go into standby mode and will need to be paired again before use. Using AUX mode When a 3.5mm audio cable is plugged in, the speaker will operate in AUX mode. The indicator light will glow green. You can use the VOL-/VOL+ buttons to control the audio volume. Specifications Speaker: 2”/3Ω/3W Frequency response: 100Hz-18KHz S/N ratio: ≥70dB Bluetooth: 2.1 + EDR, Class II Bluetooth range: 8-10m Supports A2DP, AVRCP, HFP, & HSP Power: DC 5V 500mA Battery: Rechargeable Lithium-ion, 3.7V 400mAh Battery life: 7 hours (on 50% volume) Dimensions: 64 x 67mm Weight: 173g Package includes Etekcity T3 Bluetooth speaker User’s manual 3.5mm audio cable Mini USB power cable EN 62479:2010 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 EN 301 489-1 V1.9.2 EN 301 489-17 V2.2.1 EN 301 328 V1.7.1 Note: The Etekcity T3 Bluetooth speaker is made of high-quality materials and can be recycled. This product contains a Lithium-ion battery. Please follow local regulations regarding disposal of electronic products.