Download User Manual - Projector Central

17 Be careful not to let dust near
the Ventilation holes (intake) go
inside the inner part of the
projector when cleaning.
Ventilation holes
(intake)
original position.
19 Turn on the projector, then
select the desired setting item
on the Setup
menu. The
menu screen below will be
appeared.
Note
The disposal rules for used fluorescent tubes
depend on where you live. Follow the waste
disposal policy in your area.
20 Select “Yes”.
Caution
Do not put your hands into the lamp
replacement slot, and do not allow any liquid
or other objects into the slot to avoid
electrical shock or fire.
69
Others
18 Place the project back on its
Notes
• Be sure to use an LMP-H400 Projector Lamp
for replacement. If you use lamps other than
the LMP-H400, the projector may
malfunction.
• Be sure to turn off the projector and unplug
the power cord before replacing the lamp,
then check the ON/STANDBY lamp has
already been turned off.
• The projector will not turn on unless the lamp
is securely installed in place.
• The projector will not turn on unless the lamp
cover are securely closed.
• To cancel a message displayed on the screen,
press either the button on the remote control
or the one on the control panel on the
projector.