Download EX-9212ZigBee-Z

2.2.3 Pair / Set Button
The “Pair/Set” button is for pairing the devices and use a pin to push the Pair/Set button for active
it. For more detail information please see chapter 3.3 “The device’s pairing procedures”.
2.3 LED Indicators
The LEDs indicate of the device status.
PWR Indicator:
It is a power indicator (When the power is on, the LED will be on.)
Pair Indicator:
It shows the device indicator of pairing status and when ZigBee End Device is operated in pair
status then the LED will be blink every three seconds.
The pair LED indicator of ZigBee Coordinator is normally blinking once per 3 seconds and when
active the pairing function within 60 seconds period that the pair LED indicator will be blinked
once second.
Rx Indicator:
Data received indicator (When packet are receiving from the network, the LED will blink.)
Tx Indicator:
Data sent indicator (When packets are sending to the network, the LED will blink.)
12